Magnetic Movement Tray for 25x25 mm Bases
Magnetic Movement Tray for 25x25 mm Bases
Couldn't load pickup availability
300×300 mm tray for 144 miniatures on 25 mm bases in 12 ranks of 12.
Or, with other bases:
- 72 cavalry models on 25×50 mm bases in 6 ranks of 12
- 50 cavalry models on 30×60 mm bases in 5 ranks of 10 (The Old World)
- 24 miniatures on 50×75 mm bases in 4 ranks of 6
- 18 chariots or monstrous cavalry models on 50×100 mm bases in 3 ranks of 6
- 36 miniatures on 50×50 mm bases in 6 ranks of 6
- 100 miniatures on 30 mm bases in 10 ranks of 10 (The Old World)
- 225 miniatures on 20 mm bases in 15 ranks of 15 (WHFB, Reforged and The Ninth Age)
A hundred and forty-four 25 mm miniatures: the largest tray in this listing, at 300×300 mm, and it takes seven other base sizes as well, the largest being 50×100 mm for chariots and the smallest 20 mm. The 0.6 mm galvanised steel sheet covers the whole plate, and on it the magnetised bases stay still even if the tray is knocked or tilted, with the paintwork protected. Under that sheet, the 3D-printed PLA body, made in the ImpriWars workshop, carries hidden magnets for the metal shelves of the case. The 2 mm border, for its part, gives each unit precision, saves room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Twelve wide and twelve deep: room for 144 bases of 25 mm, like those of Tomb Kings Skeleton Warriors in The Old World or Saurus Warriors in WHFB.
Magnetic movement tray for 25×25 mm bases, for Warhammer: The Old World and Warhammer Fantasy Battles. The formation is chosen by columns and ranks, and the unit moves and is stored as a single piece.
About the tray
Made in the ImpriWars workshop from 3D-printed PLA, it has a 0.6 mm galvanised steel sheet where magnetised bases stay firm even if the tray is knocked or tilted, with the paintwork protected, and hidden magnets that fix it to the metal shelves of a carry case. The 2 mm border makes every move precise, takes less room in the case and keeps the game fair.
Formations
There are 83 formations, from 3 to 144 miniatures. Some of them:
- Five wide and two deep: 10 miniatures, on a 125×50 mm tray.
- Five wide and four deep: 20 miniatures, 125×100 mm.
- Ten wide and four deep: 40 miniatures, 250×100 mm.
- Twelve wide and twelve deep: 144 miniatures, 300×300 mm.
Many also take other bases, such as 25×50 mm cavalry; each formation says so.
Games and units
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age. In The Old World it is used, for example, by Wood Elf Glade Guard and Eternal Guard, or the Dark Elf Black Guard of Naggarond. In Warhammer Fantasy, by Lizardmen Temple Guard and Black Orcs.
Frequently asked questions
What do the bases need to stay in place?
A magnet in each base. Our 25×25 mm square bases can be ordered with a magnet.
Is there a tray for units of 10, 15 or 20 miniatures?
Yes, counting frontage by depth: 10 as five by two or a single rank of ten; 15 as three by five or five by three; and 20 as four by five, five by four or ten by two.
More sizes in Movement trays for square bases.
75×25 mm tray for 3 miniatures on 25 mm bases in a single rank.
Three 25 mm bases in a row: the smallest of the 25 mm trays, made for a command group or for characters that move together. Its top face is a 0.6 mm galvanised steel sheet that holds magnetised bases even if the tray is knocked or tilted, with the paintwork protected; inside the 3D-printed PLA, hidden magnets fix it to the metal shelves of the case. The 2 mm border makes placement precise and the tray compact in the case, and the game stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Three wide in a single rank: the command group (champion, standard bearer and musician) of a unit of Elven Spearmen of the High Elves or of Empire Greatswords, in The Old World.
75×50 mm tray for 6 miniatures on 25 mm bases in 2 ranks of 3.
Or 3 cavalry models on 25×50 mm bases in a single rank.
Six miniatures in two ranks of three, for small elite units or detachments. The 0.6 mm galvanised steel sheet covering the tray holds them firmly by their magnets even if the tray is knocked or tilted, and the paintwork stays protected. Inside the 3D-printed PLA body are hidden magnets for the metal shelves of the case; around it, a 2 mm border for precise placement, a compact fit in the case and a game that stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Three wide and two deep: six Dwarf Hammerers or a detachment of six Empire State Missile Troops, in The Old World.
75×75 mm tray for 9 miniatures on 25 mm bases in 3 ranks of 3.
Nine miniatures in a compact three-by-three block. Each magnetised base stays stuck to the 0.6 mm galvanised steel sheet even if the tray is knocked or tilted, with the paintwork protected. Underneath, the 3D-printed PLA forms the body and houses the hidden magnets that hold it to the metal shelves of the case. The 2 mm border helps move the block precisely, frees up space in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Three wide and three deep: nine High Elf Swordmasters of Hoeth or nine Dwarf Slayers, in The Old World.
100×75 mm tray for 12 miniatures on 25 mm bases in 4 ranks of 3.
Or 6 cavalry models on 25×50 mm bases in 2 ranks of 3.
Turned through 90°, it takes 2 miniatures on 50×75 mm bases in a single rank or 12 miniatures on 25 mm bases in 3 ranks of 4.
Twelve miniatures, three wide, or four wide with the tray turned; the 0.6 mm galvanised steel sheet holds them equally well either way, even if the tray is knocked or tilted, with the paintwork protected. The 3D-printed PLA gives it body and houses the hidden magnets that stick it to the metal shelves of the case. Its 2 mm border gives precision when wheeling the unit, takes little room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Three wide and four deep, or four wide and three deep with the tray turned: twelve Dwarf Longbeards or twelve Wood Elf Wardancers, in The Old World.
125×75 mm tray for 15 miniatures on 25 mm bases in 5 ranks of 3.
Turned through 90°, it takes 15 miniatures on 25 mm bases in 3 ranks of 5.
A column of fifteen miniatures, long and narrow, that travels and deploys in one piece: the 0.6 mm galvanised steel sheet grips the magnetised bases even if the tray is knocked or tilted, and the paintwork remains protected. It sits on a 3D-printed PLA body with hidden magnets that keep it fixed on the metal shelves of the case. The slim 2 mm border adds precision, saves room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Three wide and five deep, or five wide and three deep with the tray turned: fifteen High Elf White Lions of Chrace or fifteen Wood Elf Wildwood Rangers, in The Old World.
150×75 mm tray for 18 miniatures on 25 mm bases in 6 ranks of 3.
Or 9 cavalry models on 25×50 mm bases in 3 ranks of 3.
Turned through 90°, it takes 3 miniatures on 50×75 mm bases in a single rank or 18 miniatures on 25 mm bases in 3 ranks of 6.
Six ranks of three, eighteen miniatures and a single piece to move. On the 0.6 mm galvanised steel sheet, the magnetised bases stay in formation even if the tray is knocked or tilted, and the paintwork stays protected. The body, made in the ImpriWars workshop from 3D-printed PLA, includes hidden magnets for the metal shelves of the case. A 2 mm border runs around it: the unit advances precisely, fits into less space in the case and the game stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Three wide and six deep, or six wide and three deep with the tray turned: eighteen Dwarf Warriors or eighteen Dwarf Thunderers, in The Old World.
175×75 mm tray for 21 miniatures on 25 mm bases in 7 ranks of 3.
Turned through 90°, it takes 21 miniatures on 25 mm bases in 3 ranks of 7.
Twenty-one miniatures in seven ranks of three. It is a long tray, and the 3D-printed PLA keeps it firm from one end to the other; on top, the 0.6 mm galvanised steel sheet holds the magnetised bases even if the tray is knocked or tilted, and so protects the paintwork. Under the sheet are hidden magnets that anchor it to the metal shelves of the case. The 2 mm border gives precision to every move, adds little bulk in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Three wide and seven deep, or seven wide and three deep with the tray turned: twenty-one Dark Elf Witch Elves or twenty-one Black Ark Corsairs from the same army, in The Old World.
200×75 mm tray for 24 miniatures on 25 mm bases in 8 ranks of 3.
Or 12 cavalry models on 25×50 mm bases in 4 ranks of 3.
Turned through 90°, it takes 4 miniatures on 50×75 mm bases in a single rank or 24 miniatures on 25 mm bases in 3 ranks of 8.
Three wide and eight ranks deep: twenty-four miniatures, each held by its magnet to the 0.6 mm galvanised steel sheet even if the tray is knocked or tilted, while the paintwork travels protected. Under the sheet, the 3D-printed PLA body carries hidden magnets that grip the metal shelves of the case. With the 2 mm border, the unit wheels precisely, takes little room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Three wide and eight deep, or eight wide and three deep with the tray turned: twenty-four Tomb Kings Skeleton Warriors or twenty-four Skeleton Archers from the same army, in The Old World.
225×75 mm tray for 27 miniatures on 25 mm bases in 9 ranks of 3.
Turned through 90°, it takes 27 miniatures on 25 mm bases in 3 ranks of 9.
A column nine ranks deep and three wide, twenty-seven miniatures in all, that goes whole from table to case. The 0.6 mm galvanised steel sheet keeps them in place by their magnets even if the tray is knocked or tilted, with the paintwork safe. Inside the 3D-printed PLA body, hidden magnets keep the tray on the metal shelves of the case. With its 2 mm border, the column handles precisely and packs small in the case, while the game stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Three wide and nine deep, or nine wide and three deep with the tray turned: twenty-seven Bretonnian Men-at-Arms or twenty-seven Peasant Bowmen from the same army, in The Old World.
250×75 mm tray for 30 miniatures on 25 mm bases in 10 ranks of 3.
Or 15 cavalry models on 25×50 mm bases in 5 ranks of 3.
Turned through 90°, it takes 5 miniatures on 50×75 mm bases in a single rank or 30 miniatures on 25 mm bases in 3 ranks of 10.
Thirty 25 mm bases in ten ranks of three, which become three ranks of ten with the tray turned: a narrow frontage or a very wide one from the same piece. Every magnetised base clings to the 0.6 mm galvanised steel sheet even if the tray is knocked or tilted, and the paintwork is protected. Hidden magnets inside the 3D-printed PLA body secure the tray to the metal shelves of the case, while the 2 mm border gives precision in both orientations, needs very little room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Three wide and ten deep, or ten wide and three deep with the tray turned: thirty Empire State Troops or thirty Skaven Clanrats, in The Old World.
100×25 mm tray for 4 miniatures on 25 mm bases in a single rank.
Four 25 mm bases in a single rank: just right for a character and the command group of their unit. On the 0.6 mm galvanised steel sheet that covers it, magnetised bases hold even if the tray is knocked or tilted, and their paintwork is protected. The 3D-printed PLA body houses hidden magnets for the case's metal shelves, and the 2 mm border helps line the rank up precisely, takes almost no room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Four wide in a single rank: a character with the command group (champion, standard bearer and musician) of a unit of Empire State Troops or Dwarf Warriors, in The Old World.
100×50 mm tray for 8 miniatures on 25 mm bases in 2 ranks of 4.
Or 4 cavalry models on 25×50 mm bases in a single rank.
Or 2 miniatures on 50×50 mm bases in a single rank.
Eight miniatures in two ranks of four, four cavalry models or two 50×50 mm bases: the 0.6 mm galvanised steel sheet holds any of them by their magnets even if the tray is knocked or tilted, with the paintwork protected. The hidden magnets under the sheet keep the 3D-printed PLA tray attached to the metal shelves of the case. Its 2 mm border adds just what is needed: precision when moving, little room in the case and a game that stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Four wide and two deep: eight Dwarf Ironbreakers or eight Wood Elf Deepwood Scouts, in The Old World.
100×75 mm tray for 12 miniatures on 25 mm bases in 3 ranks of 4.
Or 2 miniatures on 50×75 mm bases in a single rank.
Twelve miniatures in three ranks of four make a small, manageable block. Each magnetised base grips the 0.6 mm galvanised steel sheet even if the tray is knocked or tilted, and the paintwork travels protected. The body, made in the ImpriWars workshop from 3D-printed PLA, carries hidden magnets that keep it on the metal shelves of the case, and its 2 mm border allows precise wheeling, fits into little space in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Four wide and three deep: twelve Elven Archers of the High Elves or twelve Empire Flagellants, in The Old World.
100×100 mm tray for 16 miniatures on 25 mm bases in 4 ranks of 4.
Or, with other bases:
- 8 cavalry models on 25×50 mm bases in 2 ranks of 4
- 2 chariots or monstrous cavalry models on 50×100 mm bases in a single rank
- 4 miniatures on 50×50 mm bases in 2 ranks of 2
- 25 miniatures on 20 mm bases in 5 ranks of 5 (WHFB, Reforged and The Ninth Age)
Sixteen 25 mm miniatures in a four-by-four square, though the tray also takes cavalry, chariots, 50×50 mm bases or 20 mm ones. With all of them, the 0.6 mm galvanised steel sheet holds the bases by their magnets even if the tray is knocked or tilted, with the paintwork protected. Inside, the 3D-printed PLA carries hidden magnets that fix it to the metal shelves of the case. The 2 mm border around it gives precision, saves room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Four wide and four deep: sixteen Dwarf Ironbreakers in The Old World, or sixteen Chosen of Chaos in WHFB.
125×100 mm tray for 20 miniatures on 25 mm bases in 5 ranks of 4.
Turned through 90°, it takes 10 cavalry models on 25×50 mm bases in 2 ranks of 5 or 20 miniatures on 25 mm bases in 4 ranks of 5.
Five ranks of four 25 mm miniatures, or four of five with the tray turned, a position in which it also takes ten cavalry models. Each magnetised base is gripped by the 0.6 mm galvanised steel sheet even if the tray is knocked or tilted, with the paintwork kept safe. The rigid 3D-printed PLA body keeps hidden magnets under the sheet that secure it on the case's metal shelves. The 2 mm border makes each manoeuvre precise, needs hardly any room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Four wide and five deep, or five wide and four deep with the tray turned: twenty Skaven Stormvermin in The Old World, or twenty Lizardmen Saurus Warriors in WHFB.
150×100 mm tray for 24 miniatures on 25 mm bases in 6 ranks of 4.
Or 12 cavalry models on 25×50 mm bases in 3 ranks of 4.
Or 4 miniatures on 50×75 mm bases in 2 ranks of 2.
Or 6 miniatures on 50×50 mm bases in 3 ranks of 2.
Turned through 90°, it takes 12 cavalry models on 25×50 mm bases in 2 ranks of 6, 3 chariots or monstrous cavalry models on 50×100 mm bases in a single rank, 6 miniatures on 50×50 mm bases in 2 ranks of 3 or 24 miniatures on 25 mm bases in 4 ranks of 6.
With the tray turned, it also takes cavalry, chariots and 50×50 mm bases, besides the twenty-four miniatures it holds in six ranks of four. Whatever sits on it stays put on the 0.6 mm galvanised steel sheet if it is magnetised, even if the tray is knocked or tilted, and the paintwork travels protected. Hidden magnets inside the 3D-printed PLA body keep the tray on the case's metal shelves, while the 2 mm border allows precise moves, takes less room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Four wide and six deep, or six wide and four deep with the tray turned: twenty-four Vampire Counts Crypt Ghouls in The Old World, or twenty-four Plaguebearers of Nurgle in WHFB.
175×100 mm tray for 28 miniatures on 25 mm bases in 7 ranks of 4.
Turned through 90°, it takes 14 cavalry models on 25×50 mm bases in 2 ranks of 7 or 28 miniatures on 25 mm bases in 4 ranks of 7.
Seven ranks of four: twenty-eight miniatures on a long, narrow tray, or fourteen cavalry models when turned. On the 0.6 mm galvanised steel sheet, each magnetised base stays still even if the tray is knocked or tilted, with the paintwork protected. Below, the 3D-printed PLA makes the body firm and carries hidden magnets to stay on the metal shelves of the case. With its 2 mm border, the unit is placed precisely, uses less space in the case and the game stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Four wide and seven deep, or seven wide and four deep with the tray turned: twenty-eight Vampire Counts Skeleton Warriors in The Old World, or twenty-eight Chaos Marauders in WHFB.
200×100 mm tray for 32 miniatures on 25 mm bases in 8 ranks of 4.
Or, with other bases:
- 16 cavalry models on 25×50 mm bases in 4 ranks of 4
- 4 chariots or monstrous cavalry models on 50×100 mm bases in 2 ranks of 2
- 8 miniatures on 50×50 mm bases in 4 ranks of 2
- 50 miniatures on 20 mm bases in 10 ranks of 5 (WHFB, Reforged and The Ninth Age)
Turned through 90°, it takes 16 cavalry models on 25×50 mm bases in 2 ranks of 8, 4 chariots or monstrous cavalry models on 50×100 mm bases in a single rank, 8 miniatures on 50×50 mm bases in 2 ranks of 4, 32 miniatures on 25 mm bases in 4 ranks of 8 or 50 miniatures on 20 mm bases in 5 ranks of 10 (WHFB, Reforged and The Ninth Age).
Thirty-two miniatures in eight ranks of four, plus many other combinations in both orientations, from 20 mm infantry up to chariots on 50×100 mm bases. If they are magnetised, every one of them stays fixed to the 0.6 mm galvanised steel sheet even if the tray is knocked or tilted, with the paintwork protected. The 3D-printed PLA body comes from the ImpriWars workshop with hidden magnets for the case's metal shelves, and the 2 mm border brings precision to each formation, takes little room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Four wide and eight deep, or eight wide and four deep with the tray turned: thirty-two Vampire Counts Zombies in The Old World, or a mob of thirty-two Orc Boyz in WHFB.
225×100 mm tray for 36 miniatures on 25 mm bases in 9 ranks of 4.
Or 6 miniatures on 50×75 mm bases in 3 ranks of 2.
Turned through 90°, it takes 18 cavalry models on 25×50 mm bases in 2 ranks of 9 or 36 miniatures on 25 mm bases in 4 ranks of 9.
Thirty-six miniatures in nine ranks of four: a long column that the tray moves in one go. On top, a 0.6 mm galvanised steel sheet: each magnetised base stays in its place even if the tray is knocked or tilted, and the paintwork remains protected. Inside, hidden magnets in the 3D-printed PLA body for the metal shelves of the case. Around it, a 2 mm border that lets the column wheel precisely, saves room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Four wide and nine deep, or nine wide and four deep with the tray turned: thirty-six Skaven Clanrats in The Old World, or thirty-six Pink Horrors of Tzeentch in WHFB.
250×100 mm tray for 40 miniatures on 25 mm bases in 10 ranks of 4.
Or 20 cavalry models on 25×50 mm bases in 5 ranks of 4.
Or 10 miniatures on 50×50 mm bases in 5 ranks of 2.
Turned through 90°, it takes 20 cavalry models on 25×50 mm bases in 2 ranks of 10, 5 chariots or monstrous cavalry models on 50×100 mm bases in a single rank, 10 miniatures on 50×50 mm bases in 2 ranks of 5 or 40 miniatures on 25 mm bases in 4 ranks of 10.
Ten ranks of four add up to forty 25 mm miniatures, enough for a large regiment or two medium-sized units. The magnetised bases cling to the 0.6 mm galvanised steel sheet and stay there even if the tray is knocked or tilted, so every figure arrives with its paintwork protected. The body is 3D-printed PLA, with hidden magnets under the sheet that keep it on the case's metal shelves. Thanks to the 2 mm border, the regiment manoeuvres precisely, adds little bulk in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Four wide and ten deep, or ten wide and four deep with the tray turned: forty Ogre Kingdoms Gnoblar Fighters in The Old World, or forty Bloodletters of Khorne in WHFB.
125×25 mm tray for 5 miniatures on 25 mm bases in a single rank.
Five 25 mm miniatures in a single rank: the minimum unit for many elite troops in The Old World. Beneath them, a 0.6 mm galvanised steel sheet holds them by their magnets even if the tray is knocked or tilted, with the paintwork protected. The narrow 3D-printed PLA body carries hidden magnets for the metal shelves of the case, and its 2 mm border keeps the rank precisely aligned, barely takes up room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Five wide in a single rank: five Empire Greatswords or five Dwarf Quarrellers, in The Old World.
125×50 mm tray for 10 miniatures on 25 mm bases in 2 ranks of 5.
Or 5 cavalry models on 25×50 mm bases in a single rank.
Two ranks of five miniatures, or five cavalry models in a single rank: a small tray with two uses. The 0.6 mm galvanised steel sheet holds the magnetised bases of either even if the tray is knocked or tilted, and the paintwork travels protected. The 3D-printed PLA body has hidden magnets built in for the case's metal shelves. Its 2 mm border makes moves precise, saves room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Five wide and two deep: ten Elven Spearmen of the High Elves or a unit of Phoenix Guard from the same army, in The Old World.
125×75 mm tray for 15 miniatures on 25 mm bases in 3 ranks of 5.
Three ranks of five miniatures make a block of fifteen here, on a 0.6 mm galvanised steel sheet. Each magnetised base keeps its position even if the tray is knocked or tilted, and the paintwork stays sheltered. Underneath is a 3D-printed PLA body whose hidden magnets hold it firm on the case's metal shelves; all round runs a 2 mm border, for a precisely placed block, hardly any bulk in the case and a game that stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Five wide and three deep: fifteen Lizardmen Skink Skirmishers or fifteen Skaven Plague Monks, in The Old World.
125×100 mm tray for 20 miniatures on 25 mm bases in 4 ranks of 5.
Or 10 cavalry models on 25×50 mm bases in 2 ranks of 5.
Twenty miniatures in four ranks of five: the classic infantry regiment on a single magnetic movement tray. The 0.6 mm galvanised steel sheet covering it holds each magnetised base even if the tray is knocked or tilted, so the paintwork stays protected. Between games, its hidden magnets keep it still on the metal shelves of the case; the body, 3D-printed PLA, comes from the ImpriWars workshop. And with a 2 mm border, the regiment moves precisely, uses little space in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Five wide and four deep: just the right size for a unit of High Elf Lothern Sea Guard in The Old World or a regiment of Chaos Warriors in WHFB.
125×125 mm tray for 25 miniatures on 25 mm bases in 5 ranks of 5.
A square tray for a five-by-five block, twenty-five miniatures in all. The magnetised bases fix to the 0.6 mm galvanised steel sheet and stay firm even if the tray is knocked or tilted, with their paintwork protected. The hidden magnets that hold it to the case's metal shelves sit inside the 3D-printed PLA body. The 2 mm border gives precision when wheeling the block, takes very little room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Five wide and five deep: twenty-five Dark Elf Warriors in The Old World, or twenty-five Forsaken of the Warriors of Chaos in WHFB.
150×125 mm tray for 30 miniatures on 25 mm bases in 6 ranks of 5.
Or 15 cavalry models on 25×50 mm bases in 3 ranks of 5.
Turned through 90°, it takes 30 miniatures on 25 mm bases in 5 ranks of 6.
Thirty miniatures in six ranks of five or, with the tray turned, five ranks of six; it also takes fifteen cavalry models. The 0.6 mm galvanised steel sheet grips every magnetised base even if the tray is knocked or tilted, and their paintwork stays protected. The body, 3D-printed in PLA in the ImpriWars workshop, includes hidden magnets for the case's metal shelves. Thanks to the 2 mm border, manoeuvres are precise, the tray packs small in the case and the game stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Five wide and six deep, or six wide and five deep with the tray turned: thirty Tomb Kings Skeleton Warriors or a Night Goblin Mob of thirty, in The Old World.
175×125 mm tray for 35 miniatures on 25 mm bases in 7 ranks of 5.
Turned through 90°, it takes 35 miniatures on 25 mm bases in 5 ranks of 7.
Seven ranks of five: thirty-five miniatures, or seven wide with the tray turned. With so many bases, what matters most is the 0.6 mm galvanised steel sheet: it holds them by their magnets even if the tray is knocked or tilted, so they arrive with their paintwork protected. The 3D-printed PLA shapes a body with hidden magnets that hold it to the metal shelves of the case. Thanks to the 2 mm border, the unit manoeuvres precisely, the tray needs little space in the case and the game stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Five wide and seven deep, or seven wide and five deep with the tray turned: an Ungor Herd of thirty-five in The Old World or a Gor Herd of the same size in WHFB, both from the Beastmen.
200×125 mm tray for 40 miniatures on 25 mm bases in 8 ranks of 5.
Or 20 cavalry models on 25×50 mm bases in 4 ranks of 5.
Turned through 90°, it takes 40 miniatures on 25 mm bases in 5 ranks of 8.
Forty miniatures in eight ranks of five, twenty cavalry models in four ranks of five, or forty in five ranks of eight with the tray turned. In any of those formations, the magnetised bases stay held to the 0.6 mm galvanised steel sheet even if the tray is knocked or tilted, and the paintwork travels protected. Under the sheet, the 3D-printed PLA carries hidden magnets to keep the tray on the metal shelves of the case. The 2 mm border gives precision to whichever formation is chosen, saves space in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Five wide and eight deep, or eight wide and five deep with the tray turned: forty Dark Elf Repeater Crossbowmen in The Old World, or forty Black Orcs in WHFB.
225×125 mm tray for 45 miniatures on 25 mm bases in 9 ranks of 5.
Turned through 90°, it takes 45 miniatures on 25 mm bases in 5 ranks of 9.
Nine ranks of five add up to forty-five miniatures: room for a large unit and a supporting one. The 0.6 mm galvanised steel sheet keeps them in formation even if the tray is knocked or tilted, with the paintwork protected. Under that sheet, the 3D-printed PLA body carries the hidden magnets that anchor it to the metal shelves of the case. Its 2 mm border keeps both units precise on the table and compact in the case, and the game stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Five wide and nine deep, or nine wide and five deep with the tray turned: room for 45 bases of 25 mm, like those of Skaven Clanrats or Stormvermin, in The Old World.
250×125 mm tray for 50 miniatures on 25 mm bases in 10 ranks of 5.
Or 25 cavalry models on 25×50 mm bases in 5 ranks of 5.
Turned through 90°, it takes 50 miniatures on 25 mm bases in 5 ranks of 10.
Fifty 25 mm miniatures in ten ranks of five, or twenty-five cavalry models: the largest of the trays five wide. On its 0.6 mm galvanised steel sheet, magnetised bases hold even if the tray is knocked or tilted, and the paintwork stays protected. The 3D-printed PLA body includes hidden magnets for the metal shelves of the case, and the slim 2 mm border gives each unit precision, adds barely any bulk in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Five wide and ten deep, or ten wide and five deep with the tray turned: fifty Empire State Troops in The Old World, or fifty Saurus Warriors in WHFB.
150×25 mm tray for 6 miniatures on 25 mm bases in a single rank.
This tray's 2 mm border adds very little to the frontage of six miniatures, and it shows: precise placement of the rank, little space taken in the case and a game that stays fair. Under the bases, a 0.6 mm galvanised steel sheet holds them by their magnets even if the tray is knocked or tilted, with the paintwork protected; under the sheet, a 3D-printed PLA body with hidden magnets for the metal shelves of the case.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Six wide in a single rank: six Wood Elf Wildwood Rangers or six Daemonettes of Slaanesh, in The Old World.
150×50 mm tray for 12 miniatures on 25 mm bases in 2 ranks of 6.
Or 6 cavalry models on 25×50 mm bases in a single rank.
Or 3 miniatures on 50×50 mm bases in a single rank.
In the case, its hidden magnets keep it fixed to the metal shelves; on the table, the 0.6 mm galvanised steel sheet does the same for the twelve magnetised bases even if the tray is knocked or tilted, and the paintwork stays protected. It also takes six cavalry models or three 50×50 mm bases. The body is 3D-printed PLA, and the 2 mm border gives both ranks precision, takes little room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Six wide and two deep: twelve Empire Greatswords or a unit of Tomb Kings Tomb Guard, in The Old World.
150×75 mm tray for 18 miniatures on 25 mm bases in 3 ranks of 6.
Or 3 miniatures on 50×75 mm bases in a single rank.
Eighteen painted miniatures reach the table just as they left home: the 0.6 mm galvanised steel sheet holds them by their magnetised bases even if the tray is knocked or tilted, and the paintwork stays protected. The 3D-printed PLA tray carries hidden magnets that fix it to the metal shelves of the case, and it also takes three 50×75 mm bases. With its 2 mm border, the three ranks of six move precisely, the tray saves room in the case and the game stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Six wide and three deep: eighteen Dark Elf Har Ganeth Executioners or a unit of Chaos Dwarf Infernal Guard, in The Old World.
150×100 mm tray for 24 miniatures on 25 mm bases in 4 ranks of 6.
Or 12 cavalry models on 25×50 mm bases in 2 ranks of 6.
Or 3 chariots or monstrous cavalry models on 50×100 mm bases in a single rank.
Or 6 miniatures on 50×50 mm bases in 2 ranks of 3.
Six wide and four ranks deep: twenty-four miniatures, twelve cavalry models, three chariots or six 50×50 mm bases, depending on the unit. The whole surface is a 0.6 mm galvanised steel sheet, and any magnetised base stays on it even if the tray is knocked or tilted, with the paintwork protected. Inside the 3D-printed PLA, hidden magnets for the metal shelves of the case; around it, a 2 mm border that lets each unit be placed precisely, keeps its footprint in the case small and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Six wide and four deep: twenty-four Empire State Missile Troops in The Old World, or twenty-four Wood Elf Dryads in WHFB.
150×125 mm tray for 30 miniatures on 25 mm bases in 5 ranks of 6.
Thirty miniatures in five ranks of six, on a 150×125 mm tray made in the ImpriWars workshop. Its 3D-printed PLA body is topped with a 0.6 mm galvanised steel sheet: magnetised bases hold on to it even if the tray is knocked or tilted, and the paintwork arrives protected. Beneath the sheet, hidden magnets fix it to the metal shelves of the case. And a 2 mm border with three virtues: precise manoeuvres, little bulk in the case and a game that stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Six wide and five deep: thirty Empire Veteran State Troops in The Old World, or thirty Chaos Warriors in WHFB.
150×150 mm tray for 36 miniatures on 25 mm bases in 6 ranks of 6.
Or, with other bases:
- 18 cavalry models on 25×50 mm bases in 3 ranks of 6
- 6 miniatures on 50×75 mm bases in 2 ranks of 3
- 9 miniatures on 50×50 mm bases in 3 ranks of 3
- 25 miniatures on 30 mm bases in 5 ranks of 5 (The Old World)
Six ranks of six make a square block of thirty-six miniatures; cavalry and 50×75 mm, 50×50 mm or 30 mm bases fit too. Whichever they are, if magnetised they grip the 0.6 mm galvanised steel sheet even if the tray is knocked or tilted, and their paintwork travels protected. The hidden magnets in the 3D-printed PLA body keep the tray on the metal shelves of the case, and the 2 mm border gives precision in all four directions, saves space in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Six wide and six deep: thirty-six Elven Spearmen in The Old World, or thirty-six Daemonettes of Slaanesh in WHFB.
175×150 mm tray for 42 miniatures on 25 mm bases in 7 ranks of 6.
Turned through 90°, it takes 21 cavalry models on 25×50 mm bases in 3 ranks of 7 or 42 miniatures on 25 mm bases in 6 ranks of 7.
Forty-two miniatures in seven ranks of six or, turned, six ranks of seven; it also takes twenty-one cavalry models. For a tray this size, the 3D-printed PLA gives a firm body, and the 0.6 mm galvanised steel sheet covering it holds the magnetised bases even if the tray is knocked or tilted, with the paintwork protected. The hidden magnets take care of the case, keeping the tray stuck to its metal shelves. Finally, the 2 mm border adds precision, takes little room and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Six wide and seven deep, or seven wide and six deep with the tray turned: room for 42 bases of 25 mm, like those of Vampire Counts Zombies or Crypt Ghouls, in The Old World.
200×150 mm tray for 48 miniatures on 25 mm bases in 8 ranks of 6.
Or 24 cavalry models on 25×50 mm bases in 4 ranks of 6.
Or 6 chariots or monstrous cavalry models on 50×100 mm bases in 2 ranks of 3.
Or 12 miniatures on 50×50 mm bases in 4 ranks of 3.
Turned through 90°, it takes 24 cavalry models on 25×50 mm bases in 3 ranks of 8, 8 miniatures on 50×75 mm bases in 2 ranks of 4, 12 miniatures on 50×50 mm bases in 3 ranks of 4 or 48 miniatures on 25 mm bases in 6 ranks of 8.
Forty-eight miniatures in eight ranks of six, and many more options: cavalry, chariots and 50×75 and 50×50 mm bases, one way round or the other. The entire surface is a 0.6 mm galvanised steel sheet, so any magnetised base stays held even if the tray is knocked or tilted, with its paintwork protected. Under the sheet, the 3D-printed PLA carries hidden magnets that fix the tray to the metal shelves of the case. The 2 mm border gives precision when deploying each unit, takes little room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Six wide and eight deep, or eight wide and six deep with the tray turned: a Goblin Mob of forty-eight in The Old World, or a mob of Orc Boyz of the same size in WHFB.
225×150 mm tray for 54 miniatures on 25 mm bases in 9 ranks of 6.
Or 9 miniatures on 50×75 mm bases in 3 ranks of 3.
Turned through 90°, it takes 27 cavalry models on 25×50 mm bases in 3 ranks of 9 or 54 miniatures on 25 mm bases in 6 ranks of 9.
Nine ranks of six give fifty-four 25 mm bases, enough to carry two units together. Each magnetised base is held to the 0.6 mm galvanised steel sheet even if the tray is knocked or tilted, and the paintwork travels protected. The body, 3D-printed PLA made in the ImpriWars workshop, houses the hidden magnets that stick it to the metal shelves of the case. With its 2 mm border, both units move precisely, the tray adds little bulk in the case and the game stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Six wide and nine deep, or nine wide and six deep with the tray turned: room for 54 bases of 25 mm, like those of Skaven Clanrats or Plague Monks, in The Old World.
250×150 mm tray for 60 miniatures on 25 mm bases in 10 ranks of 6.
Or 30 cavalry models on 25×50 mm bases in 5 ranks of 6.
Or 15 miniatures on 50×50 mm bases in 5 ranks of 3.
Turned through 90°, it takes 30 cavalry models on 25×50 mm bases in 3 ranks of 10, 10 miniatures on 50×75 mm bases in 2 ranks of 5, 15 miniatures on 50×50 mm bases in 3 ranks of 5 or 60 miniatures on 25 mm bases in 6 ranks of 10.
Sixty miniatures, thirty cavalry models or fifteen 50×50 mm bases: a large and very versatile tray, in either orientation. Its 0.6 mm galvanised steel sheet holds every magnetised base even if the tray is knocked or tilted, with the paintwork protected, and its hidden magnets keep it on the metal shelves of the case. The body is 3D-printed PLA with a 2 mm border that gives any formation precision, takes little room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Six wide and ten deep, or ten wide and six deep with the tray turned: sixty Bretonnian Men-at-Arms in The Old World, or sixty Chaos Marauders in WHFB.
300×150 mm tray for 72 miniatures on 25 mm bases in 12 ranks of 6.
Or, with other bases:
- 36 cavalry models on 25×50 mm bases in 6 ranks of 6
- 25 cavalry models on 30×60 mm bases in 5 ranks of 5 (The Old World)
- 12 miniatures on 50×75 mm bases in 4 ranks of 3
- 9 chariots or monstrous cavalry models on 50×100 mm bases in 3 ranks of 3
- 18 miniatures on 50×50 mm bases in 6 ranks of 3
- 50 miniatures on 30 mm bases in 10 ranks of 5 (The Old World)
Turned through 90°, it takes 36 cavalry models on 25×50 mm bases in 3 ranks of 12, 12 miniatures on 50×75 mm bases in 2 ranks of 6, 18 miniatures on 50×50 mm bases in 3 ranks of 6, 50 miniatures on 30 mm bases in 5 ranks of 10 (The Old World) or 72 miniatures on 25 mm bases in 6 ranks of 12.
Seventy-two 25 mm miniatures in twelve ranks of six, or six ranks of twelve with the tray turned, and a long list of other bases, from 30 mm up to 50×100 mm chariots. For all of them, the 0.6 mm galvanised steel sheet acts as a firm base: it holds each magnetised base even if the tray is knocked or tilted and keeps the paintwork protected. The tray is made in the ImpriWars workshop from 3D-printed PLA and carries hidden magnets to stay on the metal shelves of the case. Its 2 mm border gives several units precision at once, takes little room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Six wide and twelve deep, or twelve wide and six deep with the tray turned: room for 72 bases of 25 mm, like those of Tomb Kings Skeleton Warriors in The Old World or Saurus Warriors in WHFB.
175×25 mm tray for 7 miniatures on 25 mm bases in a single rank.
Seven 25 mm bases side by side on a tray one rank deep. The 0.6 mm galvanised steel sheet keeps them aligned even if the tray is knocked or tilted, and their paintwork stays protected. Underneath, 3D-printed PLA; inside, hidden magnets that grip the metal shelves of the case. And around it, a 2 mm border that gives the line precision, takes almost no room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Seven wide in a single rank: seven High Elf White Lions of Chrace or seven Dwarf Longbeards, in The Old World.
175×50 mm tray for 14 miniatures on 25 mm bases in 2 ranks of 7.
Or 7 cavalry models on 25×50 mm bases in a single rank.
Fourteen miniatures in two ranks of seven, or seven cavalry models in one: a wide frontage and little depth. The magnetised bases are held to the 0.6 mm galvanised steel sheet even if the tray is knocked or tilted, with the paintwork well protected. The tray is 3D-printed PLA and houses hidden magnets for the metal shelves of the case; its 2 mm border allows precise charges, takes little space in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Seven wide and two deep: fourteen Elven Archers of the High Elves or fourteen Dark Elf Witch Elves, in The Old World.
175×75 mm tray for 21 miniatures on 25 mm bases in 3 ranks of 7.
Three ranks of seven give twenty-one miniatures with a broad frontage. Held by their magnets to the 0.6 mm galvanised steel sheet, they stay in place even if the tray is knocked or tilted, with their paintwork safe. The tray, 3D-printed in PLA in the ImpriWars workshop, carries hidden magnets that anchor it to the metal shelves of the case. Its 2 mm border: precision in every wheel, less space taken in the case and a game that stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Seven wide and three deep: twenty-one Skaven Stormvermin in The Old World, or twenty-one Chosen of Chaos in WHFB.
175×100 mm tray for 28 miniatures on 25 mm bases in 4 ranks of 7.
Or 14 cavalry models on 25×50 mm bases in 2 ranks of 7.
Twenty-eight miniatures in four ranks of seven, or fourteen cavalry models in two. The whole top face is a 0.6 mm galvanised steel sheet, which holds the magnetised bases even if the tray is knocked or tilted and protects the paintwork. Beneath it, the 3D-printed PLA body carries the hidden magnets that secure it on the metal shelves of the case. The 2 mm border lets the unit move exactly, reduces the space it takes in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Seven wide and four deep: twenty-eight Bretonnian Peasant Bowmen in The Old World, or a unit of twenty-eight Lizardmen Temple Guard in WHFB.
175×125 mm tray for 35 miniatures on 25 mm bases in 5 ranks of 7.
Thirty-five miniatures, seven wide and five deep, on a 175×125 mm tray. If their bases are magnetised, the 0.6 mm galvanised steel sheet keeps them in formation even if the tray is knocked or tilted, and the paintwork travels protected. Within the 3D-printed PLA body are the hidden magnets that fasten it to the metal shelves of the case. A 2 mm border runs round it, so the unit gains precision, the case gains room and the game stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Seven wide and five deep: a Goblin Mob of thirty-five in The Old World, or thirty-five Bloodletters of Khorne in WHFB.
175×150 mm tray for 42 miniatures on 25 mm bases in 6 ranks of 7.
Or 21 cavalry models on 25×50 mm bases in 3 ranks of 7.
Six ranks of seven, forty-two miniatures, or twenty-one cavalry models in three ranks: the same tray works for infantry and cavalry. With magnetised bases, the 0.6 mm galvanised steel sheet holds them even if the tray is knocked or tilted, and the paintwork remains protected. Hidden magnets in the 3D-printed PLA body fasten it to the case's metal shelves, and the 2 mm border brings precision to every unit, saves space in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Seven wide and six deep: room for 42 bases of 25 mm, like those of Tomb Kings Skeleton Warriors or Skeleton Archers, in The Old World.
175×175 mm tray for 49 miniatures on 25 mm bases in 7 ranks of 7.
Seven by seven makes forty-nine miniatures on a square tray 175 mm a side. All of them stay stuck to the 0.6 mm galvanised steel sheet by their magnets even if the tray is knocked or tilted, with the paintwork protected. The 3D-printed PLA body is made in the ImpriWars workshop and includes hidden magnets that fix it to the metal shelves of the case. Its 2 mm border gives precision in any direction, saves space in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Seven wide and seven deep: room for 49 bases of 25 mm, like those of Vampire Counts Zombies or Grave Guard, in The Old World.
200×175 mm tray for 56 miniatures on 25 mm bases in 8 ranks of 7.
Or 28 cavalry models on 25×50 mm bases in 4 ranks of 7.
Turned through 90°, it takes 56 miniatures on 25 mm bases in 7 ranks of 8.
Fifty-six miniatures in eight ranks of seven, or seven ranks of eight with the tray turned; it also takes twenty-eight cavalry models. The 0.6 mm galvanised steel sheet holds every magnetised base even if the tray is knocked or tilted, and protects the paintwork on all of them. The body is 3D-printed PLA, with hidden magnets for the metal shelves of the case, and its 2 mm border gives precision when deploying, makes good use of the space in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Seven wide and eight deep, or eight wide and seven deep with the tray turned: fifty-six Elven Spearmen in The Old World, or fifty-six Plaguebearers of Nurgle in WHFB.
225×175 mm tray for 63 miniatures on 25 mm bases in 9 ranks of 7.
Turned through 90°, it takes 63 miniatures on 25 mm bases in 7 ranks of 9.
Sixty-three miniatures: nine ranks of seven or, with the tray turned, seven ranks of nine. The 0.6 mm galvanised steel sheet keeps hold of their magnetised bases even if the tray is knocked or tilted, so the paintwork travels protected. The tray's 3D-printed PLA body contains the hidden magnets that keep it on the case's metal shelves, and with the 2 mm border the unit wheels and advances precisely, packs neatly into the case and the game stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Seven wide and nine deep, or nine wide and seven deep with the tray turned: room for 63 bases of 25 mm, like those of Ogre Kingdoms Gnoblar Fighters, in The Old World.
250×175 mm tray for 70 miniatures on 25 mm bases in 10 ranks of 7.
Or 35 cavalry models on 25×50 mm bases in 5 ranks of 7.
Turned through 90°, it takes 70 miniatures on 25 mm bases in 7 ranks of 10.
Up to seventy 25 mm miniatures, in ten ranks of seven or seven of ten with the tray turned, or thirty-five cavalry models, on the longest tray seven wide. The whole tray is surfaced with a 0.6 mm galvanised steel sheet, so any magnetised base stays firm even if the tray is knocked or tilted, and every model keeps its paintwork protected. In the 3D-printed PLA body, hidden magnets grip the metal shelves of the case. The border, just 2 mm thick, brings three advantages: precise movement, little bulk in the case and a game that stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Seven wide and ten deep, or ten wide and seven deep with the tray turned: room for 70 bases of 25 mm, like those of Dark Elf Warriors or Repeater Crossbowmen, in The Old World.
200×25 mm tray for 8 miniatures on 25 mm bases in a single rank.
Eight miniatures in a single rank: a long frontage with very little depth, for units that deploy in line. The 0.6 mm galvanised steel sheet keeps each magnetised base in line even if the tray is knocked or tilted, with the paintwork protected. The 3D-printed PLA gives it its shape, and hidden magnets hold it to the metal shelves of the case. With a 2 mm border, the line is placed precisely, adds barely any bulk in the case and the game stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Eight wide in a single rank: eight Dwarf Slayers or eight Wood Elf Wardancers, in The Old World.
200×50 mm tray for 16 miniatures on 25 mm bases in 2 ranks of 8.
Or 8 cavalry models on 25×50 mm bases in a single rank.
Or 4 miniatures on 50×50 mm bases in a single rank.
Sixteen miniatures in two ranks of eight, eight cavalry models in one, or four 50×50 mm bases: it serves three kinds of unit. On its 0.6 mm galvanised steel sheet, magnetised bases hold their position even if the tray is knocked or tilted, and the paintwork travels protected. Hidden magnets set into the 3D-printed PLA body fix it to the metal shelves of the case. And its 2 mm border gives both ranks precision, saves room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Eight wide and two deep: sixteen High Elf Swordmasters of Hoeth or sixteen Empire Greatswords, in The Old World.
200×75 mm tray for 24 miniatures on 25 mm bases in 3 ranks of 8.
Or 4 miniatures on 50×75 mm bases in a single rank.
Three ranks of eight: twenty-four miniatures with a very wide frontage, or four 50×75 mm bases in a row. Across such a wide front, the 0.6 mm galvanised steel sheet keeps each magnetised base in place even if the tray is knocked or tilted, with the paintwork protected. Made in the ImpriWars workshop, the tray has hidden magnets inside its 3D-printed PLA body to stay on the metal shelves of the case. Its 2 mm border brings precision to wheeling such a wide unit, takes little room and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Eight wide and three deep: twenty-four Skaven Stormvermin in The Old World, or a Bestigor Herd of twenty-four in WHFB.
200×100 mm tray for 32 miniatures on 25 mm bases in 4 ranks of 8.
Or, with other bases:
- 16 cavalry models on 25×50 mm bases in 2 ranks of 8
- 4 chariots or monstrous cavalry models on 50×100 mm bases in a single rank
- 8 miniatures on 50×50 mm bases in 2 ranks of 4
- 50 miniatures on 20 mm bases in 5 ranks of 10 (WHFB, Reforged and The Ninth Age)
Thirty-two 25 mm miniatures in four ranks of eight. The list of alternatives is long: sixteen cavalry models, four chariots, eight 50×50 mm bases or fifty 20 mm miniatures. With any of them, if the base is magnetised, the 0.6 mm galvanised steel sheet holds it even if the tray is knocked or tilted, and the paintwork stays protected. The 3D-printed PLA body houses hidden magnets that keep it still on the metal shelves of the case. With the 2 mm border, units are placed precisely, the tray takes very little room in the case and the game stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Eight wide and four deep: thirty-two Empire State Troops in The Old World, or thirty-two Forsaken of the Warriors of Chaos in WHFB.
200×125 mm tray for 40 miniatures on 25 mm bases in 5 ranks of 8.
Forty miniatures in five ranks of eight form a large, wide unit that this tray moves in one piece. Each magnetised base clings to the 0.6 mm galvanised steel sheet even if the tray is knocked or tilted, and the paintwork stays safe. Underneath, 3D-printed PLA, with hidden magnets that cling to the case's metal shelves. All round runs a 2 mm border that makes moves precise and the tray compact in the case, keeping the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Eight wide and five deep: forty Vampire Counts Zombies in The Old World, or forty Pink Horrors of Tzeentch in WHFB.
200×150 mm tray for 48 miniatures on 25 mm bases in 6 ranks of 8.
Or 24 cavalry models on 25×50 mm bases in 3 ranks of 8.
Or 8 miniatures on 50×75 mm bases in 2 ranks of 4.
Or 12 miniatures on 50×50 mm bases in 3 ranks of 4.
Forty-eight miniatures, eight wide and six deep. For cavalry, it takes twenty-four models; for large miniatures, eight 50×75 mm bases or twelve 50×50 mm ones. If magnetised, all of them grip the 0.6 mm galvanised steel sheet even if the tray is knocked or tilted, and keep their paintwork protected. The hidden magnets in the body, 3D-printed in PLA, keep the tray still on the case's metal shelves. And the 2 mm border lets each formation be squared up precisely, fits into little space in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Eight wide and six deep: room for 48 bases of 25 mm, like those of Tomb Kings Skeleton Archers in The Old World, or 48 Wood Elf Dryads in WHFB.
200×175 mm tray for 56 miniatures on 25 mm bases in 7 ranks of 8.
Eight wide by seven deep: fifty-six miniatures on a 200×175 mm tray. All of them stay held by their magnets to the 0.6 mm galvanised steel sheet even if the tray is knocked or tilted, and their paintwork is protected. In the ImpriWars workshop, the body is 3D-printed in PLA and fitted with hidden magnets for the metal shelves of the case. With its 2 mm border, each unit manoeuvres precisely, the tray stays compact in the case and the game stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Eight wide and seven deep: room for 56 bases of 25 mm, like those of Skaven Stormvermin or Clanrats, in The Old World.
200×200 mm tray for 64 miniatures on 25 mm bases in 8 ranks of 8.
Or, with other bases:
- 32 cavalry models on 25×50 mm bases in 4 ranks of 8
- 8 chariots or monstrous cavalry models on 50×100 mm bases in 2 ranks of 4
- 16 miniatures on 50×50 mm bases in 4 ranks of 4
- 25 miniatures on 40×40 mm bases in 5 ranks of 5
- 100 miniatures on 20 mm bases in 10 ranks of 10 (WHFB, Reforged and The Ninth Age)
A square tray 200 mm a side with room for sixty-four 25 mm miniatures, as well as 20 mm, 40×40 mm and 50×50 mm bases, cavalry and chariots. On the 0.6 mm galvanised steel sheet, every magnetised base holds even if the tray is knocked or tilted, with the paintwork protected. The 3D-printed PLA body houses the hidden magnets that hold it to the metal shelves of the case. Its 2 mm border lets the block wheel precisely, keeps the tray's bulk in the case low and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Eight wide and eight deep: room for 64 bases of 25 mm, like those of a Beastmen Ungor Herd or Gor Herd, in The Old World.
225×200 mm tray for 72 miniatures on 25 mm bases in 9 ranks of 8.
Or 12 miniatures on 50×75 mm bases in 3 ranks of 4.
Turned through 90°, it takes 36 cavalry models on 25×50 mm bases in 4 ranks of 9 or 72 miniatures on 25 mm bases in 8 ranks of 9.
Seventy-two miniatures in nine ranks of eight or, turned, eight ranks of nine; it also takes thirty-six cavalry models or twelve 50×75 mm bases. However large the unit, each magnetised base stays on the 0.6 mm galvanised steel sheet even if the tray is knocked or tilted, and the paintwork remains protected. Hidden magnets inside the 3D-printed PLA hold the tray to the metal shelves of the case. And the 2 mm border achieves three things: precise deployment, less space taken in the case and a game that stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Eight wide and nine deep, or nine wide and eight deep with the tray turned: room for 72 bases of 25 mm, like those of Empire State Troops or State Missile Troops, in The Old World.
250×200 mm tray for 80 miniatures on 25 mm bases in 10 ranks of 8.
Or 40 cavalry models on 25×50 mm bases in 5 ranks of 8.
Or 20 miniatures on 50×50 mm bases in 5 ranks of 4.
Turned through 90°, it takes 40 cavalry models on 25×50 mm bases in 4 ranks of 10, 10 chariots or monstrous cavalry models on 50×100 mm bases in 2 ranks of 5, 20 miniatures on 50×50 mm bases in 4 ranks of 5 or 80 miniatures on 25 mm bases in 8 ranks of 10.
Eighty 25 mm miniatures: the largest tray eight wide, and ten wide once turned. It also takes forty cavalry models, twenty 50×50 mm bases or ten chariots. Every magnetised base stays stuck to the 0.6 mm galvanised steel sheet even if the tray is knocked or tilted, and the paintwork travels protected. Its hidden magnets, set into the 3D-printed PLA, keep it on the metal shelves of the case, and its 2 mm border adds precision, saves room and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Eight wide and ten deep, or ten wide and eight deep with the tray turned: room for 80 bases of 25 mm, like those of Vampire Counts Zombies, in The Old World.
225×25 mm tray for 9 miniatures on 25 mm bases in a single rank.
A single rank of nine 25 mm miniatures: a broad frontage and just one rank deep. On the 0.6 mm galvanised steel sheet, each magnetised base keeps its position even if the tray is knocked or tilted, and the paintwork travels safe and protected. The narrow body is 3D-printed PLA, with hidden magnets inside that hold it to the metal shelves of the case. Its 2 mm border lets the line advance precisely, takes up hardly any room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Nine wide in a single rank: nine Dwarf Hammerers or nine Wood Elf Deepwood Scouts, in The Old World.
225×50 mm tray for 18 miniatures on 25 mm bases in 2 ranks of 9.
Or 9 cavalry models on 25×50 mm bases in a single rank.
Two ranks of nine for eighteen miniatures, or nine cavalry models in a single rank. It is a tray with plenty of frontage and little depth, and the 0.6 mm galvanised steel sheet holds all its magnetised bases even if the tray is knocked or tilted, with the paintwork protected. Inside, hidden magnets in the 3D-printed PLA fix it to the metal shelves of the case. With its 2 mm border, the frontage advances straight and precisely, the case gains space and the game stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Nine wide and two deep: eighteen Dwarf Quarrellers or eighteen Wood Elf Wildwood Rangers, in The Old World.
225×75 mm tray for 27 miniatures on 25 mm bases in 3 ranks of 9.
Twenty-seven miniatures in three ranks of nine: a wide, shallow regiment that deploys in a single movement. The 0.6 mm galvanised steel sheet keeps it in formation even if the tray is knocked or tilted, and each miniature's paintwork stays protected. Under the sheet, the 3D-printed PLA body is made in the ImpriWars workshop with hidden magnets for the metal shelves of the case. And the border, just 2 mm thick, adds precision, reduces bulk in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Nine wide and three deep: twenty-seven Vampire Counts Skeleton Warriors in The Old World, or twenty-seven Chosen of Chaos in WHFB.
225×100 mm tray for 36 miniatures on 25 mm bases in 4 ranks of 9.
Or 18 cavalry models on 25×50 mm bases in 2 ranks of 9.
Thirty-six miniatures in four ranks of nine, or eighteen cavalry models in two. The 3D-printed PLA tray is covered with a 0.6 mm galvanised steel sheet on which each magnetised base holds even if the tray is knocked or tilted, so the paintwork stays protected. When the game is over, its hidden magnets keep it firmly on the metal shelves of the case. Its 2 mm border, for its part, gives every move precision, takes little space in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Nine wide and four deep: thirty-six Dark Elf Black Ark Corsairs in The Old World, or thirty-six Chaos Warriors in WHFB.
225×125 mm tray for 45 miniatures on 25 mm bases in 5 ranks of 9.
Nine wide and five deep, this 225×125 mm tray brings together forty-five miniatures: room for two units, one in front of the other. If the bases are magnetised, the 0.6 mm galvanised steel sheet holds them even if the tray is knocked or tilted, and in doing so protects the paintwork. The 3D-printed PLA forms a firm body that houses hidden magnets for the metal shelves of the case. The 2 mm border frames it all: exact moves, less bulk in the case and a game that stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Nine wide and five deep: room for 45 bases of 25 mm, like those of Bretonnian Men-at-Arms or Peasant Bowmen, in The Old World.
225×150 mm tray for 54 miniatures on 25 mm bases in 6 ranks of 9.
Or 27 cavalry models on 25×50 mm bases in 3 ranks of 9.
Six ranks of nine, fifty-four miniatures, or twenty-seven cavalry models in three ranks. The whole top face is galvanised steel: a 0.6 mm sheet that magnetised bases grip even if the tray is knocked or tilted, with the paintwork protected. On the metal shelves of the case it stays still thanks to the hidden magnets in its 3D-printed PLA body. And its 2 mm border makes manoeuvring two units at once precise, saves space in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Nine wide and six deep: fifty-four Dark Elf Warriors in The Old World, or fifty-four Chaos Marauders in WHFB.
225×175 mm tray for 63 miniatures on 25 mm bases in 7 ranks of 9.
Sixty-three miniatures in seven ranks of nine. With a tray like this, two whole units travel together and arrive in formation: each magnetised base is kept in place by the 0.6 mm galvanised steel sheet even if the tray is knocked or tilted, with the paintwork protected. For the case, the 3D-printed PLA body has hidden magnets that cling to its metal shelves. The 2 mm border gives precision when deploying them, saves space in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Nine wide and seven deep: room for 63 bases of 25 mm, like those of Tomb Kings Skeleton Archers or Skeleton Warriors, in The Old World.
225×200 mm tray for 72 miniatures on 25 mm bases in 8 ranks of 9.
Or 36 cavalry models on 25×50 mm bases in 4 ranks of 9.
Seventy-two miniatures in eight ranks of nine, or thirty-six cavalry models in four ranks. That is a lot of surface, and all of it is 0.6 mm galvanised steel sheet: magnetised bases hold on it even if the tray is knocked or tilted, with their paintwork protected. It sits on a 3D-printed PLA body, with hidden magnets that hold it to the metal shelves of the case. The slim 2 mm border lets the units be placed precisely, takes little room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Nine wide and eight deep: room for 72 bases of 25 mm, like those of Empire State Troops in The Old World or Plaguebearers of Nurgle in WHFB.
225×225 mm tray for 81 miniatures on 25 mm bases in 9 ranks of 9.
Eighty-one miniatures in nine ranks of nine, on a square tray 225 mm a side. Each one stays held by its magnet to the 0.6 mm galvanised steel sheet even if the tray is knocked or tilted, with the paintwork kept safe. The tray is 3D-printed in PLA in the ImpriWars workshop and fitted with hidden magnets for the metal shelves of the case, while the 2 mm border lets the square wheel precisely, keeps the tray compact in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Nine wide and nine deep: room for 81 bases of 25 mm, like those of Ogre Kingdoms Gnoblar Fighters, in The Old World.
250×225 mm tray for 90 miniatures on 25 mm bases in 10 ranks of 9.
Or 45 cavalry models on 25×50 mm bases in 5 ranks of 9.
Turned through 90°, it takes 15 miniatures on 50×75 mm bases in 3 ranks of 5 or 90 miniatures on 25 mm bases in 9 ranks of 10.
Up to ninety miniatures fit here, in ten ranks of nine or, with the tray turned, nine of ten; it also takes forty-five cavalry models or fifteen 50×75 mm bases. Across that whole surface, every magnetised base is gripped by the 0.6 mm galvanised steel sheet even if the tray is knocked or tilted, and the whole regiment's paintwork remains protected. Made in the ImpriWars workshop, the 3D-printed PLA body contains the hidden magnets for the case's metal shelves. And its discreet 2 mm border gives precision, saves room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Nine wide and ten deep, or ten wide and nine deep with the tray turned: room for 90 bases of 25 mm, like those of Goblin Mobs in The Old World or Saurus Warriors in WHFB.
250×25 mm tray for 10 miniatures on 25 mm bases in a single rank.
Ten miniatures in a single rank: the longest one-rank tray in this listing. On the 0.6 mm galvanised steel sheet, the whole rank stays aligned even if the tray is knocked or tilted, and so the paintwork is protected. Long and firm, the 3D-printed PLA body has hidden magnets for the case's metal shelves. With the 2 mm border, the line is placed precisely, uses little of the case's space and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Ten wide in a single rank: ten Tomb Kings Skeleton Archers or ten Lizardmen Skink Skirmishers, in The Old World.
250×50 mm tray for 20 miniatures on 25 mm bases in 2 ranks of 10.
Or 10 cavalry models on 25×50 mm bases in a single rank.
Or 5 miniatures on 50×50 mm bases in a single rank.
Two ranks of ten: twenty miniatures on a very wide frontage. The same tray also takes ten cavalry models in a rank or five 50×50 mm bases. Any of those bases, if magnetised, stays fixed on the 0.6 mm galvanised steel sheet even if the tray is knocked or tilted, with its paintwork safe. The 3D-printed PLA body houses hidden magnets that fix it to the metal shelves of the case. The 2 mm border lets the frontage move precisely and saves space in the case, while keeping the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Ten wide and two deep: twenty Dark Elf Witch Elves or twenty Skaven Plague Monks, in The Old World.
250×75 mm tray for 30 miniatures on 25 mm bases in 3 ranks of 10.
Or 5 miniatures on 50×75 mm bases in a single rank.
Thirty miniatures in three ranks of ten, for regiments that prefer a wide frontage; the tray also takes five 50×75 mm bases. Each magnetised base is held by the 0.6 mm galvanised steel sheet even if the tray is knocked or tilted, with its paintwork sheltered. Its 3D-printed PLA body carries the hidden magnets that hold the tray to the case's metal shelves, while the 2 mm border gives the frontage precision, needs very little space in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Ten wide and three deep: thirty Vampire Counts Crypt Ghouls in The Old World, or thirty Wood Elf Dryads in WHFB.
250×100 mm tray for 40 miniatures on 25 mm bases in 4 ranks of 10.
Or 20 cavalry models on 25×50 mm bases in 2 ranks of 10.
Or 5 chariots or monstrous cavalry models on 50×100 mm bases in a single rank.
Or 10 miniatures on 50×50 mm bases in 2 ranks of 5.
Ten wide and four deep for forty miniatures. With other bases, the tray takes twenty cavalry models, five chariots or ten 50×50 mm bases. The 0.6 mm galvanised steel sheet holds them all, if magnetised, even if the tray is knocked or tilted, and the paintwork stays protected. Its 3D-printed PLA body, made in the ImpriWars workshop, includes hidden magnets that keep it still on the metal shelves of the case. The 2 mm border: precision for every unit, little bulk in the case and a game that stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Ten wide and four deep: forty Dwarf Warriors in The Old World, or forty Chosen of Chaos in WHFB.
250×125 mm tray for 50 miniatures on 25 mm bases in 5 ranks of 10.
Five ranks of ten make fifty miniatures, and every one clings by its magnet to the 0.6 mm galvanised steel sheet even if the tray is knocked or tilted, keeping its paintwork protected. The tray itself is 3D-printed PLA, with hidden magnets that secure it on the metal shelves of the case. Thanks to the 2 mm border, the ranks advance precisely and the tray takes up little space in the case, and the game stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Ten wide and five deep: fifty High Elf Lothern Sea Guard in The Old World, or fifty Bloodletters of Khorne in WHFB.
250×150 mm tray for 60 miniatures on 25 mm bases in 6 ranks of 10.
Or 30 cavalry models on 25×50 mm bases in 3 ranks of 10.
Or 10 miniatures on 50×75 mm bases in 2 ranks of 5.
Or 15 miniatures on 50×50 mm bases in 3 ranks of 5.
Six ranks of ten miniatures, sixty in all. If preferred, it takes thirty cavalry models, ten 50×75 mm bases or fifteen 50×50 mm ones. With magnetised bases, the 0.6 mm galvanised steel sheet keeps them firm even if the tray is knocked or tilted, with the paintwork protected. Hidden magnets in the 3D-printed PLA body hold it to the metal shelves of the case, and a 2 mm border gives it precision, takes little room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Ten wide and six deep: room for 60 bases of 25 mm, like those of Tomb Kings Skeleton Archers, in The Old World.
250×175 mm tray for 70 miniatures on 25 mm bases in 7 ranks of 10.
Seventy miniatures, ten wide and seven deep: two units fit at once, one behind the other. The 0.6 mm galvanised steel sheet covering the tray holds their magnetised bases even if the tray is knocked or tilted, and the paintwork remains protected. The body, 3D-printed in PLA, houses the hidden magnets that stick it to the metal shelves of the case. And the 2 mm border shows in three ways: precise manoeuvres, less bulk in the case and a game that stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Ten wide and seven deep: room for 70 bases of 25 mm, like those of Vampire Counts Grave Guard or Zombies, in The Old World.
250×200 mm tray for 80 miniatures on 25 mm bases in 8 ranks of 10.
Or 40 cavalry models on 25×50 mm bases in 4 ranks of 10.
Or 10 chariots or monstrous cavalry models on 50×100 mm bases in 2 ranks of 5.
Or 20 miniatures on 50×50 mm bases in 4 ranks of 5.
Eighty miniatures in eight ranks of ten; with other bases, forty cavalry models, ten chariots or twenty 50×50 mm bases. All of them, if magnetised, stay firm on the 0.6 mm galvanised steel sheet even if the tray is knocked or tilted, and their paintwork is kept protected. The 3D-printed PLA forms the body and includes hidden magnets for the metal shelves of the case. The 2 mm border brings precision to each unit, gains space in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Ten wide and eight deep: room for 80 bases of 25 mm, like those of an Ungor Herd in The Old World or a Gor Herd in WHFB.
250×225 mm tray for 90 miniatures on 25 mm bases in 9 ranks of 10.
Or 15 miniatures on 50×75 mm bases in 3 ranks of 5.
Nine ranks of ten give ninety 25 mm bases: a lot of infantry in a single piece, or fifteen 50×75 mm bases. The 0.6 mm galvanised steel sheet holds them all by their magnets even if the tray is knocked or tilted, and the paintwork travels protected. Under the sheet, the 3D-printed PLA carries hidden magnets that keep the tray on the metal shelves of the case. Its 2 mm border allows precise deployment, saves room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Ten wide and nine deep: room for 90 bases of 25 mm, like those of Night Goblin Mobs, in The Old World.
250×250 mm tray for 100 miniatures on 25 mm bases in 10 ranks of 10.
Or 50 cavalry models on 25×50 mm bases in 5 ranks of 10.
Or 25 miniatures on 50×50 mm bases in 5 ranks of 5.
A hundred 25 mm miniatures on a square tray 250 mm a side, the largest of those ten wide; it also takes fifty cavalry models or twenty-five 50×50 mm bases. Its 0.6 mm galvanised steel sheet holds all hundred magnetised bases even if the tray is knocked or tilted, and the paintwork remains protected. Made in the ImpriWars workshop from 3D-printed PLA, it carries hidden magnets for the metal shelves of the case. And all around, a 2 mm border that makes manoeuvres precise, leaves room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Ten wide and ten deep: room for 100 bases of 25 mm, like those of Tomb Kings Skeleton Warriors in The Old World or Chaos Marauders in WHFB.
300×150 mm tray for 72 miniatures on 25 mm bases in 6 ranks of 12.
Or, with other bases:
- 36 cavalry models on 25×50 mm bases in 3 ranks of 12
- 12 miniatures on 50×75 mm bases in 2 ranks of 6
- 18 miniatures on 50×50 mm bases in 3 ranks of 6
- 50 miniatures on 30 mm bases in 5 ranks of 10 (The Old World)
At 300 mm wide, it is the widest tray in this listing together with the 300×300 mm one: seventy-two miniatures in six ranks of twelve, or thirty-six cavalry models, twelve 50×75 mm bases, eighteen 50×50 mm ones or fifty 30 mm ones. On the 0.6 mm galvanised steel sheet, each magnetised base stays in place even if the tray is knocked or tilted, with the paintwork protected. Inside the 3D-printed PLA body are hidden magnets for the metal shelves of the case. The 2 mm border gives such a long frontage precision, takes very little room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Twelve wide and six deep: room for 72 bases of 25 mm, like those of Dark Elf Warriors in The Old World or Chaos Warriors in WHFB.
300×300 mm tray for 144 miniatures on 25 mm bases in 12 ranks of 12.
Or, with other bases:
- 72 cavalry models on 25×50 mm bases in 6 ranks of 12
- 50 cavalry models on 30×60 mm bases in 5 ranks of 10 (The Old World)
- 24 miniatures on 50×75 mm bases in 4 ranks of 6
- 18 chariots or monstrous cavalry models on 50×100 mm bases in 3 ranks of 6
- 36 miniatures on 50×50 mm bases in 6 ranks of 6
- 100 miniatures on 30 mm bases in 10 ranks of 10 (The Old World)
- 225 miniatures on 20 mm bases in 15 ranks of 15 (WHFB, Reforged and The Ninth Age)
A hundred and forty-four 25 mm miniatures: the largest tray in this listing, at 300×300 mm, and it takes seven other base sizes as well, the largest being 50×100 mm for chariots and the smallest 20 mm. The 0.6 mm galvanised steel sheet covers the whole plate, and on it the magnetised bases stay still even if the tray is knocked or tilted, with the paintwork protected. Under that sheet, the 3D-printed PLA body, made in the ImpriWars workshop, carries hidden magnets for the metal shelves of the case. The 2 mm border, for its part, gives each unit precision, saves room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Twelve wide and twelve deep: room for 144 bases of 25 mm, like those of Tomb Kings Skeleton Warriors in The Old World or Saurus Warriors in WHFB.
View full details
