Magnetic Movement Tray for 25x50 mm Cavalry Bases
Magnetic Movement Tray for 25x50 mm Cavalry Bases
Couldn't load pickup availability
250×250 mm tray for 50 cavalry models on 25×50 mm bases in 5 ranks of 10.
Or 25 miniatures on 50×50 mm bases in 5 ranks of 5.
Or 100 miniatures on 25 mm bases in 10 ranks of 10.
Fifty cavalry models on a square 250×250 mm tray, the second largest in this listing. Its whole top face is a 0.6 mm galvanised steel sheet, which holds the magnetised bases even if the tray is knocked or tilted and protects every miniature's paintwork. Inside the 3D-printed PLA body sit hidden magnets to stay on the metal shelves of the case. On the outside, the 2 mm border: precision on the table, room saved in the case and a game that stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Ten wide and five deep: room for 50 bases of 25×50 mm, like those of Bretonnian Knights of the Realm or Mounted Yeomen, in WHFB.
Magnetic movement tray for cavalry on 25×50 mm bases, for Warhammer: The Old World and Warhammer Fantasy Battles. It is chosen by columns and ranks, and the unit advances, wheels and is stored together.
About the tray
It is made in the ImpriWars workshop from 3D-printed PLA, with a 0.6 mm galvanised steel sheet on top: each magnetised base stays held even if the tray is knocked or tilted, and the paintwork travels protected. Inside, hidden magnets fix it to the metal shelves of a carry case. The 2 mm border lets the unit charge and wheel precisely, takes less room in the case and keeps the game fair.
Formations
There are 43 formations, from 3 to 72 bases. Some of them:
- Five wide and two deep: 10 models, on a 125×100 mm tray.
- Six wide and two deep: 12 models, 150×100 mm.
- Ten wide and two deep: 20 models, 250×100 mm.
All of them also take 25 mm bases, and many take 50×50 mm bases; each formation says so.
Games and units
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age. In Warhammer Fantasy it is the base for almost all cavalry: for example, Bretonnian Grail Knights or Vampire Counts Blood Knights. In The Old World it is used by Bretonnian Mounted Yeomen, Vampire Counts Dire Wolves and the Ogre Kingdoms Sabretusk Pack.
Frequently asked questions
What do the bases need to stay in place?
Magnets in the base. Our 25×50 mm cavalry bases can be ordered with two magnets.
Is there a tray for units of 10, 15 or 20 models?
Yes. Frontage by depth: five by two or ten in a single rank for 10; three by five or five by three for 15; and four by five, five by four or ten by two for 20.
Other movement trays in Movement trays for square bases.
75×50 mm tray for 3 cavalry models on 25×50 mm bases in a single rank.
Or 6 miniatures on 25 mm bases in 2 ranks of 3.
This is the smallest tray in the cavalry listing: three cavalry models in a row on a 0.6 mm galvanised steel sheet, which holds their magnetised bases even if the tray is knocked or tilted and keeps all three models' paintwork protected. Under the sheet sits a 3D-printed PLA body, and inside it hidden magnets that hold the tray to the metal shelves of the case. Finally, a 2 mm border lets the trio be placed precisely, barely takes up room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Three wide in a single rank: three Skaven Warplock Jezzails or three Ogre Kingdoms Sabretusks, in The Old World.
100×75 mm tray for 6 cavalry models on 25×50 mm bases in 2 ranks of 3.
Or 12 miniatures on 25 mm bases in 4 ranks of 3.
Two ranks of three riders on a firm base: the 3D-printed PLA gives a rigid body, and the 0.6 mm galvanised steel sheet covering it holds the magnetised bases even if the tray is knocked or tilted, protecting the paintwork. Inside are hidden magnets for the metal shelves of the case. Thanks to the 2 mm border, the unit wheels precisely and the tray adds little bulk in the case, while the game stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Three wide and two deep: six Tomb Kings Skeleton Horse Archers in The Old World and in WHFB, or six Ogre Kingdoms Sabretusks in The Old World.
150×75 mm tray for 9 cavalry models on 25×50 mm bases in 3 ranks of 3.
Or 18 miniatures on 25 mm bases in 6 ranks of 3.
Three wide and three deep is a narrow, deep formation, and here it moves in one piece: the 0.6 mm galvanised steel sheet holds each magnetised base even if the tray is knocked or tilted, with the paintwork safe. Under the sheet, hidden magnets anchor it to the metal shelves of the case. And the 3D-printed PLA body has a 2 mm border that gives precision, saves space and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Three wide and three deep: nine Vampire Counts Dire Wolves, in The Old World and in WHFB.
200×75 mm tray for 12 cavalry models on 25×50 mm bases in 4 ranks of 3.
Or 24 miniatures on 25 mm bases in 8 ranks of 3.
Turned through 90°, it takes 4 miniatures on 50×75 mm bases in a single rank or 24 miniatures on 25 mm bases in 3 ranks of 8.
Long and narrow, this tray takes twelve cavalry models in a column three wide, and the 0.6 mm galvanised steel sheet covering it keeps them in place even if the tray is knocked or tilted, and each model's paintwork travels protected. The 3D-printed PLA body houses hidden magnets that hold it to the metal shelves of the case. A 2 mm border runs around it: it gives the column precision, saves space in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Three wide and four deep: twelve Chaos Warhounds in The Old World and in WHFB.
250×75 mm tray for 15 cavalry models on 25×50 mm bases in 5 ranks of 3.
Or 30 miniatures on 25 mm bases in 10 ranks of 3.
Turned through 90°, it takes 5 miniatures on 50×75 mm bases in a single rank or 30 miniatures on 25 mm bases in 3 ranks of 10.
Fifteen cavalry models on a tray 250 mm long: the 3D-printed PLA gives it a firm body from end to end and, on top, the 0.6 mm galvanised steel sheet keeps every magnetised base in its place even if the tray is knocked or tilted, and the paintwork travels protected. Beneath the sheet, hidden magnets keep it on the metal shelves of the case. The 2 mm border brings precision to moving the column, takes little room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Three wide and five deep: fifteen Tomb Kings Skeleton Horsemen in The Old World and in WHFB.
100×50 mm tray for 4 cavalry models on 25×50 mm bases in a single rank.
Or 2 miniatures on 50×50 mm bases in a single rank.
Or 8 miniatures on 25 mm bases in 2 ranks of 4.
A short rank of four cavalry models gets everything it needs here. First, a 3D-printed PLA body; on top, a 0.6 mm galvanised steel sheet that holds the magnetised bases even if the tray is knocked or tilted, so the paintwork travels protected; and inside, hidden magnets to stay fixed on the metal shelves of the case. The 2 mm border, for its part, gives precision when placing the rank, barely takes up room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Four wide in a single rank: four Skaven Warplock Jezzails or four Ogre Kingdoms Sabretusks, in The Old World.
100×100 mm tray for 8 cavalry models on 25×50 mm bases in 2 ranks of 4.
Or, with other bases:
- 2 chariots or monstrous cavalry models on 50×100 mm bases in a single rank
- 4 miniatures on 50×50 mm bases in 2 ranks of 2
- 16 miniatures on 25 mm bases in 4 ranks of 4
- 25 miniatures on 20 mm bases in 5 ranks of 5 (WHFB, Reforged and The Ninth Age)
Square and versatile, it takes cavalry, chariots or infantry, and holds them all the same way: the 0.6 mm galvanised steel sheet grips any magnetised base even if the tray is knocked or tilted, with the paintwork protected. Inside, the 3D-printed PLA body carries hidden magnets that fix it to the metal shelves of the case. Its 2 mm border is all it adds to the bases: it brings precision to moving the block, makes the tray take less room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Four wide and two deep: eight Tomb Kings Skeleton Horse Archers in The Old World and in WHFB.
150×100 mm tray for 12 cavalry models on 25×50 mm bases in 3 ranks of 4.
Or 4 miniatures on 50×75 mm bases in 2 ranks of 2.
Or 6 miniatures on 50×50 mm bases in 3 ranks of 2.
Or 24 miniatures on 25 mm bases in 6 ranks of 4.
Twelve cavalry models in three ranks of four make a compact block, and that is how they reach the table: the 0.6 mm galvanised steel sheet holds their magnetised bases even if the tray is knocked or tilted, so the paintwork arrives protected. The 3D-printed PLA body comes from the ImpriWars workshop, with hidden magnets for the metal shelves of the case. Its 2 mm border brings precision to every wheel, reduces the room the tray takes in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Four wide and three deep: twelve Bretonnian Mounted Yeomen in The Old World and in WHFB.
200×100 mm tray for 16 cavalry models on 25×50 mm bases in 4 ranks of 4.
Or, with other bases:
- 4 chariots or monstrous cavalry models on 50×100 mm bases in 2 ranks of 2
- 8 miniatures on 50×50 mm bases in 4 ranks of 2
- 32 miniatures on 25 mm bases in 8 ranks of 4
- 50 miniatures on 20 mm bases in 10 ranks of 5 (WHFB, Reforged and The Ninth Age)
Sixteen bases in four ranks of four, each in its place: the magnetised bases grip the 0.6 mm galvanised steel sheet even if the tray is knocked or tilted, with the paintwork protected. The sheet sits on 3D-printed PLA and, beneath it, hidden magnets keep the tray firmly on the metal shelves of the case. A 2 mm border completes the whole: the block wheels precisely, takes little room in the case and the game stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Four wide and four deep: room for 16 bases of 25×50 mm, like those of Vampire Counts Dire Wolves in The Old World and in WHFB, or Black Knights from the same army in WHFB.
250×100 mm tray for 20 cavalry models on 25×50 mm bases in 5 ranks of 4.
Or 10 miniatures on 50×50 mm bases in 5 ranks of 2.
Or 40 miniatures on 25 mm bases in 10 ranks of 4.
Turned through 90°, it takes 20 cavalry models on 25×50 mm bases in 2 ranks of 10, 5 chariots or monstrous cavalry models on 50×100 mm bases in a single rank, 10 miniatures on 50×50 mm bases in 2 ranks of 5 or 40 miniatures on 25 mm bases in 4 ranks of 10.
Twenty cavalry models, in a column four wide or, with the tray turned, in two ranks of ten. Whatever the formation, the 0.6 mm galvanised steel sheet holds the magnetised bases even if the tray is knocked or tilted, and all twenty keep their paintwork protected. It has a 3D-printed PLA body, with hidden magnets that grip the metal shelves of the case, and its 2 mm border gives precision in any direction, takes only the room it needs in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Four wide and five deep, or ten wide and two deep with the tray turned: room for 20 bases of 25×50 mm, like those of Chaos Dwarf Hobgoblin Wolf Riders, in The Old World.
125×50 mm tray for 5 cavalry models on 25×50 mm bases in a single rank.
Or 10 miniatures on 25 mm bases in 2 ranks of 5.
Five cavalry models in a single rank, and that rank holds from table to case and back again: the 0.6 mm galvanised steel sheet holds the magnetised bases even if the tray is knocked or tilted, with the paintwork protected, and the hidden magnets fix the tray to the metal shelves of the case. The 3D-printed PLA body has a 2 mm border that brings precision to the rank's manoeuvres, saves room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Five wide in a single rank: five Chaos Warhounds in The Old World and in WHFB, or five High Elf Silver Helms in WHFB.
125×100 mm tray for 10 cavalry models on 25×50 mm bases in 2 ranks of 5.
Or 20 miniatures on 25 mm bases in 4 ranks of 5.
Two ranks of five cavalry models travel just as they form up on the table: the 0.6 mm galvanised steel sheet holds each base by its magnet even if the tray is knocked or tilted, and protects the paintwork. The 3D-printed PLA tray stays on the metal shelves of the case thanks to its hidden magnets. The 2 mm border lets the unit charge and wheel precisely, adds hardly any bulk in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Five wide and two deep: ten Ogre Kingdoms Sabretusks in The Old World, or ten Chaos Knights in WHFB.
150×125 mm tray for 15 cavalry models on 25×50 mm bases in 3 ranks of 5.
Or 30 miniatures on 25 mm bases in 6 ranks of 5.
Fifteen cavalry bases fit this tray in three ranks of five, and that is how they stay: the 0.6 mm galvanised steel sheet holds each magnetised base even if the tray is knocked or tilted, and keeps the paintwork protected. Its 3D-printed PLA body includes hidden magnets that hold it to the metal shelves of the case, and a 2 mm border that gives the unit precision, takes little room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Five wide and three deep: fifteen Dark Elf Dark Riders in WHFB, or fifteen Tomb Kings Skeleton Horse Archers in The Old World and in WHFB.
200×125 mm tray for 20 cavalry models on 25×50 mm bases in 4 ranks of 5.
Or 40 miniatures on 25 mm bases in 8 ranks of 5.
A unit of twenty cavalry models goes from table to case in a single move. On the way, the 0.6 mm galvanised steel sheet keeps their magnetised bases in formation even if the tray is knocked or tilted, with the paintwork well protected; in the case, the hidden magnets in the 3D-printed PLA body fix the tray to the metal shelves. All with a 2 mm border that brings precision, barely adds bulk and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Five wide and four deep: room for 20 bases of 25×50 mm, like those of Vampire Counts Dire Wolves, in The Old World and in WHFB.
250×125 mm tray for 25 cavalry models on 25×50 mm bases in 5 ranks of 5.
Or 50 miniatures on 25 mm bases in 10 ranks of 5.
With room for twenty-five cavalry models, this tray can bring two units together in a single piece of 3D-printed PLA. It is covered by a 0.6 mm galvanised steel sheet on which magnetised bases stay in position even if the tray is knocked or tilted, so the paintwork stays safe. Under the sheet, hidden magnets hold it to the metal shelves of the case; around the outline, a 2 mm border gives precision, saves room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Five wide and five deep: room for 25 bases of 25×50 mm, like those of Tomb Kings Skeleton Horsemen or Skeleton Horse Archers, in The Old World and in WHFB.
150×50 mm tray for 6 cavalry models on 25×50 mm bases in a single rank.
Or 3 miniatures on 50×50 mm bases in a single rank.
Or 12 miniatures on 25 mm bases in 2 ranks of 6.
A line of six cavalry models needs every base to stay where it is, and the 0.6 mm galvanised steel sheet sees to it: the magnetised bases hold their place even if the tray is knocked or tilted, and the paintwork stays protected. The tray is 3D-printed in PLA and carries hidden magnets that keep it fixed on the metal shelves of the case. Its 2 mm border helps keep the line straight and precise, needs only a little room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Six wide in a single rank: six Bretonnian Mounted Yeomen in The Old World and in WHFB, or six Bretonnian Knights of the Realm in WHFB.
150×100 mm tray for 12 cavalry models on 25×50 mm bases in 2 ranks of 6.
Or 3 chariots or monstrous cavalry models on 50×100 mm bases in a single rank.
Or 6 miniatures on 50×50 mm bases in 2 ranks of 3.
Or 24 miniatures on 25 mm bases in 4 ranks of 6.
A frontage of six and two ranks deep: a wide formation that stays the same on the table and in the case, because the 0.6 mm galvanised steel sheet holds every magnetised base even if the tray is knocked or tilted. The paintwork, meanwhile, travels protected. Inside the 3D-printed PLA are hidden magnets for the metal shelves of the case, and the 2 mm border gives every wheel precision, frees up space in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Six wide and two deep: twelve Tomb Kings Skeleton Horse Archers in The Old World and in WHFB, or twelve High Elf Silver Helms in WHFB.
150×150 mm tray for 18 cavalry models on 25×50 mm bases in 3 ranks of 6.
Or, with other bases:
- 6 miniatures on 50×75 mm bases in 2 ranks of 3
- 9 miniatures on 50×50 mm bases in 3 ranks of 3
- 25 miniatures on 30 mm bases in 5 ranks of 5 (The Old World)
- 36 miniatures on 25 mm bases in 6 ranks of 6
Square and able to take five base sizes, from 25 mm up to 50×75 mm: the 0.6 mm galvanised steel sheet holds any of them if magnetised, even if the tray is knocked or tilted, and protects the paintwork. The 3D-printed PLA body is made in the ImpriWars workshop with hidden magnets that grip the metal shelves of the case. A 2 mm border completes the tray and gives it three advantages: it wheels precisely, packs into less space in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Six wide and three deep: room for 18 bases of 25×50 mm, like those of Chaos Dwarf Hobgoblin Wolf Riders in The Old World or Wood Elf Glade Riders in WHFB.
200×150 mm tray for 24 cavalry models on 25×50 mm bases in 4 ranks of 6.
Or 6 chariots or monstrous cavalry models on 50×100 mm bases in 2 ranks of 3.
Or 12 miniatures on 50×50 mm bases in 4 ranks of 3.
Or 48 miniatures on 25 mm bases in 8 ranks of 6.
Twenty-four cavalry models in four ranks of six share a single tray, kept rigid by its 3D-printed PLA. On top, the 0.6 mm galvanised steel sheet holds the magnetised bases even if the tray is knocked or tilted, and the paintwork remains protected. The hidden magnets underneath stick it to the metal shelves of the case. With a 2 mm border, the block is placed precisely on the table, needs little space in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Six wide and four deep: room for 24 bases of 25×50 mm, like those of Tomb Kings Skeleton Horsemen in The Old World and in WHFB, or Bretonnian Knights of the Realm in WHFB.
250×150 mm tray for 30 cavalry models on 25×50 mm bases in 5 ranks of 6.
Or 15 miniatures on 50×50 mm bases in 5 ranks of 3.
Or 60 miniatures on 25 mm bases in 10 ranks of 6.
Thirty cavalry models, room for a whole cavalry wing, and all of them stay put: the 0.6 mm galvanised steel sheet grips their magnetised bases even if the tray is knocked or tilted, with the paintwork sheltered. Underneath, the 3D-printed PLA body carries hidden magnets that anchor it to the metal shelves of the case. Outside, a 2 mm border that makes deployment precise, barely takes up room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Six wide and five deep: room for 30 bases of 25×50 mm, like those of Vampire Counts Dire Wolves or Black Knights, in WHFB.
300×150 mm tray for 36 cavalry models on 25×50 mm bases in 6 ranks of 6.
Or, with other bases:
- 25 cavalry models on 30×60 mm bases in 5 ranks of 5 (The Old World)
- 12 miniatures on 50×75 mm bases in 4 ranks of 3
- 9 chariots or monstrous cavalry models on 50×100 mm bases in 3 ranks of 3
- 18 miniatures on 50×50 mm bases in 6 ranks of 3
- 50 miniatures on 30 mm bases in 10 ranks of 5 (The Old World)
- 72 miniatures on 25 mm bases in 12 ranks of 6
Besides the thirty-six cavalry models, it takes six other base sizes, from 25 mm to 50×100 mm, and all of them stay firm on the 0.6 mm galvanised steel sheet if magnetised, even if the tray is knocked or tilted, with the paintwork protected. The body is 3D-printed PLA and carries hidden magnets under the sheet for the metal shelves of the case. Its 2 mm border gives precision to units of any size, saves space in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Six wide and six deep: room for 36 bases of 25×50 mm, like those of Chaos Warhounds, in The Old World and in WHFB.
175×50 mm tray for 7 cavalry models on 25×50 mm bases in a single rank.
Or 14 miniatures on 25 mm bases in 2 ranks of 7.
A rank of seven cavalry models on a single piece of 3D-printed PLA, long and narrow. On top, the 0.6 mm galvanised steel sheet keeps each magnetised base fixed even if the tray is knocked or tilted, and so protects the paintwork; inside, hidden magnets that cling to the metal shelves of the case. All around, a 2 mm border that gives the rank precision, lets it be stored in the case using little space and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Seven wide in a single rank: seven Chaos Dwarf Hobgoblin Wolf Riders in The Old World, or seven Empire Pistoliers in WHFB.
175×100 mm tray for 14 cavalry models on 25×50 mm bases in 2 ranks of 7.
Or 28 miniatures on 25 mm bases in 4 ranks of 7.
Two ranks of seven make a broad frontage, and this tray keeps it from the start of the game to the end: the 0.6 mm galvanised steel sheet holds all fourteen magnetised bases even if the tray is knocked or tilted, with the paintwork protected. The tray comes from the ImpriWars workshop, 3D-printed in PLA and fitted with hidden magnets that grip the metal shelves of the case. Its 2 mm border lets the frontage manoeuvre precisely, saves room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Seven wide and two deep: fourteen Tomb Kings Skeleton Horsemen in The Old World and in WHFB, or fourteen Wood Elf Wild Riders in WHFB.
175×150 mm tray for 21 cavalry models on 25×50 mm bases in 3 ranks of 7.
Or 42 miniatures on 25 mm bases in 6 ranks of 7.
Twenty-one bases in three ranks of seven, on a 3D-printed PLA body that stays firm. The 0.6 mm galvanised steel sheet on top holds each magnetised base even if the tray is knocked or tilted, so the paintwork travels protected. Under the sheet go hidden magnets for the metal shelves of the case. A 2 mm border frames it, letting all three ranks advance and wheel precisely; it adds little bulk in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Seven wide and three deep: room for 21 bases of 25×50 mm, like those of Chaos Marauder Horsemen or Chaos Knights, in WHFB.
200×175 mm tray for 28 cavalry models on 25×50 mm bases in 4 ranks of 7.
Or 56 miniatures on 25 mm bases in 8 ranks of 7.
At 200×175 mm, it is almost square and holds twenty-eight cavalry models in four ranks of seven. All of them are held to the 0.6 mm galvanised steel sheet by their magnetised bases, even if the tray is knocked or tilted, and with the paintwork protected. 3D-printed PLA forms the body, which carries hidden magnets for the metal shelves of the case. And the 2 mm border lets the block move precisely and take less room in the case, while keeping the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Seven wide and four deep: room for 28 bases of 25×50 mm, like those of Bretonnian Mounted Yeomen, in The Old World and in WHFB.
250×175 mm tray for 35 cavalry models on 25×50 mm bases in 5 ranks of 7.
Or 70 miniatures on 25 mm bases in 10 ranks of 7.
This tray takes thirty-five cavalry models, and all of them go from case to table in one go. Meanwhile, the 0.6 mm galvanised steel sheet holds the magnetised bases even if the tray is knocked or tilted, and the paintwork on every one stays protected. Beneath the sheet, a 3D-printed PLA body with hidden magnets that grip the metal shelves of the case. Its 2 mm border adds precision on the table and saves room in the case, all while keeping the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Seven wide and five deep: room for 35 bases of 25×50 mm, like those of High Elf Silver Helms or Ellyrian Reavers, in WHFB.
200×50 mm tray for 8 cavalry models on 25×50 mm bases in a single rank.
Or 4 miniatures on 50×50 mm bases in a single rank.
Or 16 miniatures on 25 mm bases in 2 ranks of 8.
Eight cavalry models in line, on a long tray that handles like a single base. The 0.6 mm galvanised steel sheet on its top face keeps the magnetised bases in line even if the tray is knocked or tilted, and the paintwork stays protected. The 3D-printed PLA body has hidden magnets that hold it still on the metal shelves of the case. Thanks to its 2 mm border, the line can be moved precisely and stored compactly in the case, and the game stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Eight wide in a single rank: eight Chaos Warhounds in The Old World and in WHFB, or eight Dark Elf Dark Riders in WHFB.
200×100 mm tray for 16 cavalry models on 25×50 mm bases in 2 ranks of 8.
Or, with other bases:
- 4 chariots or monstrous cavalry models on 50×100 mm bases in a single rank
- 8 miniatures on 50×50 mm bases in 2 ranks of 4
- 32 miniatures on 25 mm bases in 4 ranks of 8
- 50 miniatures on 20 mm bases in 5 ranks of 10 (WHFB, Reforged and The Ninth Age)
From 20 mm bases to 50×100 mm ones, this tray suits very different units, and with all of them the 0.6 mm galvanised steel sheet does the same job: it holds the magnetised bases even if the tray is knocked or tilted and keeps the paintwork protected. The body is 3D-printed PLA, made in the ImpriWars workshop, with hidden magnets that hold it to the metal shelves of the case. Its 2 mm border allows precise adjustments, reduces the space taken in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Eight wide and two deep: room for 16 bases of 25×50 mm, like those of Tomb Kings Skeleton Horse Archers in The Old World and in WHFB, or Dark Elf Cold One Knights in WHFB.
200×150 mm tray for 24 cavalry models on 25×50 mm bases in 3 ranks of 8.
Or 8 miniatures on 50×75 mm bases in 2 ranks of 4.
Or 12 miniatures on 50×50 mm bases in 3 ranks of 4.
Or 48 miniatures on 25 mm bases in 6 ranks of 8.
Three ranks of eight make a wide block, and on this tray it moves as one: each magnetised base grips the 0.6 mm galvanised steel sheet even if the tray is knocked or tilted, and the paintwork travels protected. The sheet covers a 3D-printed PLA body with hidden magnets to stay on the metal shelves of the case. And the 2 mm border adds its share: precision when moving the block, less room taken in the case and a game that stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Eight wide and three deep: room for 24 bases of 25×50 mm, like those of Bretonnian Knights of the Realm or Mounted Yeomen, in WHFB.
200×200 mm tray for 32 cavalry models on 25×50 mm bases in 4 ranks of 8.
Or, with other bases:
- 8 chariots or monstrous cavalry models on 50×100 mm bases in 2 ranks of 4
- 16 miniatures on 50×50 mm bases in 4 ranks of 4
- 25 miniatures on 40×40 mm bases in 5 ranks of 5
- 64 miniatures on 25 mm bases in 8 ranks of 8
- 100 miniatures on 20 mm bases in 10 ranks of 10 (WHFB, Reforged and The Ninth Age)
This square tray accepts six base sizes, from 20 mm to 50×100 mm, and the 0.6 mm galvanised steel sheet holds every magnetised base the same way, even if the tray is knocked or tilted; the paintwork travels protected. The 3D-printed PLA body carries hidden magnets inside that keep it on the metal shelves of the case. Around it all, a 2 mm border for precise placement, space saved in the case and a game that stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Eight wide and four deep: room for 32 bases of 25×50 mm, like those of Tomb Kings Skeleton Horsemen, in The Old World and in WHFB.
250×200 mm tray for 40 cavalry models on 25×50 mm bases in 5 ranks of 8.
Or 20 miniatures on 50×50 mm bases in 5 ranks of 4.
Or 80 miniatures on 25 mm bases in 10 ranks of 8.
Forty cavalry bases are enough for several units at once, and they all travel on the same tray: the 0.6 mm galvanised steel sheet holds them by their magnets even if the tray is knocked or tilted, with the paintwork protected. The hidden magnets in the 3D-printed PLA body keep the tray fixed on the metal shelves of the case. Finally, the 2 mm border gives each unit precision, takes little room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Eight wide and five deep: room for 40 bases of 25×50 mm, like those of Flesh Hounds of Khorne or Seekers of Slaanesh, in WHFB.
225×50 mm tray for 9 cavalry models on 25×50 mm bases in a single rank.
Or 18 miniatures on 25 mm bases in 2 ranks of 9.
Nine cavalry bases side by side form a very wide line, held straight from one end to the other by the 0.6 mm galvanised steel sheet: each magnetised base stays put even if the tray is knocked or tilted, and the paintwork remains protected. The whole piece is 3D-printed PLA, with hidden magnets inside so it stays on the metal shelves of the case. With its 2 mm border, the line advances with precision, adds almost no bulk in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Nine wide in a single rank: nine Tomb Kings Skeleton Horse Archers in The Old World and in WHFB, or nine Empire Outriders in WHFB.
225×100 mm tray for 18 cavalry models on 25×50 mm bases in 2 ranks of 9.
Or 36 miniatures on 25 mm bases in 4 ranks of 9.
Eighteen cavalry models, nine wide and two deep, on a 3D-printed PLA tray made in the ImpriWars workshop. The 0.6 mm galvanised steel sheet covering it fixes the magnetised bases even if the tray is knocked or tilted, and so protects the paintwork. The hidden magnets do the same for the tray on the metal shelves of the case. And with its 2 mm border, all eighteen move precisely, the tray takes little room in the case and it keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Nine wide and two deep: room for 18 bases of 25×50 mm, like those of Vampire Counts Dire Wolves, in The Old World and in WHFB.
225×150 mm tray for 27 cavalry models on 25×50 mm bases in 3 ranks of 9.
Or 54 miniatures on 25 mm bases in 6 ranks of 9.
Three ranks of nine add up to twenty-seven cavalry models, and the tray brings them all together: the 0.6 mm galvanised steel sheet that forms its top face grips the magnetised bases even if the tray is knocked or tilted, with the paintwork safe. Beneath that sheet, the 3D-printed PLA houses hidden magnets that keep the tray fixed on the metal shelves of the case. The 2 mm border is narrow, which gives precision on the table, saves space in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Nine wide and three deep: room for 27 bases of 25×50 mm, like those of Tomb Kings Skeleton Horse Archers or Skeleton Horsemen, in The Old World and in WHFB.
225×200 mm tray for 36 cavalry models on 25×50 mm bases in 4 ranks of 9.
Or 72 miniatures on 25 mm bases in 8 ranks of 9.
This 225×200 mm tray has room for thirty-six cavalry models, four ranks of nine, and keeps them in formation thanks to the 0.6 mm galvanised steel sheet: each magnetised base holds even if the tray is knocked or tilted, and the paintwork is protected. The 3D-printed PLA body carries hidden magnets under the sheet that stick it to the metal shelves of the case. Finally, its 2 mm border makes placing each unit precise, lets the tray pack compactly into the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Nine wide and four deep: room for 36 bases of 25×50 mm, like those of Chaos Dwarf Hobgoblin Wolf Riders, in The Old World.
250×225 mm tray for 45 cavalry models on 25×50 mm bases in 5 ranks of 9.
Or 90 miniatures on 25 mm bases in 10 ranks of 9.
It is one of the largest trays in this listing: forty-five cavalry models in five ranks of nine. The whole surface is a 0.6 mm galvanised steel sheet, and on it the magnetised bases stay still even if the tray is knocked or tilted, with the paintwork protected. Underneath, a 3D-printed PLA body with hidden magnets for the metal shelves of the case; around it, a 2 mm border that allows precise manoeuvres, saves room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Nine wide and five deep: room for 45 bases of 25×50 mm, like those of Wood Elf Glade Riders or Wild Riders, in WHFB.
250×50 mm tray for 10 cavalry models on 25×50 mm bases in a single rank.
Or 5 miniatures on 50×50 mm bases in a single rank.
Or 20 miniatures on 25 mm bases in 2 ranks of 10.
Ten cavalry models in a long rank that moves as a whole: the 0.6 mm galvanised steel sheet holds them by the magnet in each base even if the tray is knocked or tilted, with their paintwork protected. Beneath, the 3D-printed PLA forms a body with hidden magnets for the metal shelves of the case. Around the rank runs a 2 mm border: every move is precise, the tray packs into little space in the case and the game stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Ten wide in a single rank: ten Chaos Warhounds in The Old World and in WHFB, or ten Lizardmen Cold One Cavalry in WHFB.
250×100 mm tray for 20 cavalry models on 25×50 mm bases in 2 ranks of 10.
Or 5 chariots or monstrous cavalry models on 50×100 mm bases in a single rank.
Or 10 miniatures on 50×50 mm bases in 2 ranks of 5.
Or 40 miniatures on 25 mm bases in 4 ranks of 10.
Ten wide and two deep suits broad units, and the 0.6 mm galvanised steel sheet keeps them in formation even if the tray is knocked or tilted; their paintwork stays protected too. Under the sheet, hidden magnets anchor the tray to the metal shelves of the case. Made in the ImpriWars workshop from 3D-printed PLA, it is edged with a 2 mm border for precise charges and wheels, a small footprint in the case and a game that stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Ten wide and two deep: room for 20 bases of 25×50 mm, like those of Tomb Kings Skeleton Horse Archers in The Old World and in WHFB, or Empire Outriders in WHFB.
250×150 mm tray for 30 cavalry models on 25×50 mm bases in 3 ranks of 10.
Or 10 miniatures on 50×75 mm bases in 2 ranks of 5.
Or 15 miniatures on 50×50 mm bases in 3 ranks of 5.
Or 60 miniatures on 25 mm bases in 6 ranks of 10.
Three ranks of ten: the tray brings together thirty cavalry bases and keeps them on a 0.6 mm galvanised steel sheet that they grip by their magnets, even if the tray is knocked or tilted; so the paintwork travels protected. The 3D-printed PLA gives it a firm body with hidden magnets for the metal shelves of the case. And the 2 mm border gives precision when placing each unit, takes little room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Ten wide and three deep: room for 30 bases of 25×50 mm, like those of High Elf Silver Helms or Dragon Princes, in WHFB.
250×200 mm tray for 40 cavalry models on 25×50 mm bases in 4 ranks of 10.
Or 10 chariots or monstrous cavalry models on 50×100 mm bases in 2 ranks of 5.
Or 20 miniatures on 50×50 mm bases in 4 ranks of 5.
Or 80 miniatures on 25 mm bases in 8 ranks of 10.
Two large cavalry units fit on this tray, side by side or one behind the other, and all their magnetised bases stay firm on the 0.6 mm galvanised steel sheet even if the tray is knocked or tilted, with the paintwork protected. The 3D-printed PLA body carries hidden magnets that grip the metal shelves of the case. Its 2 mm border gives every manoeuvre precision, reduces the room it takes in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Ten wide and four deep: room for 40 bases of 25×50 mm, like those of Vampire Counts Dire Wolves, in The Old World and in WHFB.
250×250 mm tray for 50 cavalry models on 25×50 mm bases in 5 ranks of 10.
Or 25 miniatures on 50×50 mm bases in 5 ranks of 5.
Or 100 miniatures on 25 mm bases in 10 ranks of 10.
Fifty cavalry models on a square 250×250 mm tray, the second largest in this listing. Its whole top face is a 0.6 mm galvanised steel sheet, which holds the magnetised bases even if the tray is knocked or tilted and protects every miniature's paintwork. Inside the 3D-printed PLA body sit hidden magnets to stay on the metal shelves of the case. On the outside, the 2 mm border: precision on the table, room saved in the case and a game that stays fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Ten wide and five deep: room for 50 bases of 25×50 mm, like those of Bretonnian Knights of the Realm or Mounted Yeomen, in WHFB.
300×150 mm tray for 36 cavalry models on 25×50 mm bases in 3 ranks of 12.
Or, with other bases:
- 12 miniatures on 50×75 mm bases in 2 ranks of 6
- 18 miniatures on 50×50 mm bases in 3 ranks of 6
- 50 miniatures on 30 mm bases in 5 ranks of 10 (The Old World)
- 72 miniatures on 25 mm bases in 6 ranks of 12
Twelve cavalry models wide and three ranks deep: a very broad deployment that travels as a single piece of 3D-printed PLA. On the 0.6 mm galvanised steel sheet on top, the magnetised bases keep their formation even if the tray is knocked or tilted, and the paintwork travels sheltered. Inside, hidden magnets secure the tray to the metal shelves of the case. The 2 mm border gives precision when deploying, needs little space in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Twelve wide and three deep: room for 36 bases of 25×50 mm, like those of Dark Elf Dark Riders in WHFB or Tomb Kings Skeleton Horsemen in The Old World and in WHFB.
300×300 mm tray for 72 cavalry models on 25×50 mm bases in 6 ranks of 12.
Or, with other bases:
- 50 cavalry models on 30×60 mm bases in 5 ranks of 10 (The Old World)
- 24 miniatures on 50×75 mm bases in 4 ranks of 6
- 18 chariots or monstrous cavalry models on 50×100 mm bases in 3 ranks of 6
- 36 miniatures on 50×50 mm bases in 6 ranks of 6
- 100 miniatures on 30 mm bases in 10 ranks of 10 (The Old World)
- 144 miniatures on 25 mm bases in 12 ranks of 12
- 225 miniatures on 20 mm bases in 15 ranks of 15 (WHFB, Reforged and The Ninth Age)
Seventy-two cavalry models or seven other base sizes: this 300×300 mm plate is the largest in the cavalry listing. Its entire surface is a 0.6 mm galvanised steel sheet, on which magnetised bases keep their places even if the tray is knocked or tilted, while each one's paintwork remains protected. Inside, the 3D-printed PLA carries hidden magnets that fasten the tray to the metal shelves of the case, and the 2 mm border lends precision to the whole deployment, saves space in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Twelve wide and six deep: room for 72 bases of 25×50 mm, like those of Tomb Kings Skeleton Horsemen or Skeleton Horse Archers, in The Old World and in WHFB.
View full details
