Magnetic Movement Tray for 30x60 mm Cavalry Bases
Magnetic Movement Tray for 30x60 mm Cavalry Bases
Couldn't load pickup availability
240×180 mm tray for 24 cavalry models on 30×60 mm bases in 4 ranks of 6.
Or 48 miniatures on 30 mm bases in 8 ranks of 6 (The Old World).
Or 108 miniatures on 20 mm bases in 12 ranks of 9 (WHFB, Reforged and The Ninth Age).
Twenty-four cavalry bases form a 240×180 mm block that moves in a single go. The 0.6 mm galvanised steel sheet makes it possible: with a magnet in the base, every rider rides out knocks and tilts and keeps its paint. Inside, 3D-printed PLA; underneath, hidden magnets for the metal shelves of a carry case; around it, a 2 mm border that helps the block settle precisely on the table, takes little room and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Six wide and four deep: room for 24 bases of 30×60 mm, like those of the Empire Knights or the Empire Inner Circle Knights, in The Old World.
This magnetic movement tray for 30×60 mm cavalry bases is made for Warhammer: The Old World. With 48 formations, from 2 to 50 models, the whole squadron deploys, charges and goes back into the case still in formation.
About the tray
The 3D-printed PLA body leaves the ImpriWars workshop with a 0.6 mm galvanised steel sheet on top. Magnetised bases stay held on it even if the tray tilts or takes a knock, with the paintwork protected. The body houses hidden magnets that keep it firm on the metal shelves of a carry case, and the 2 mm border lets the frontage close up precisely, takes little room in the case and keeps the game fair.
Formations
The 48 formations run from 1 to 10 models wide and from 1 to 5 deep, on plates up to 300×300 mm. All of them also take 30×30 mm bases, and 11 take 40×60 mm bases.
Games and units
In The Old World, units on 30×60 mm bases include Bretonnian Questing Knights, High Elf Dragon Princes, Vampire Counts Blood Knights, Wood Elf Sisters of the Thorn, Empire Outriders and Seekers of Slaanesh. More movement trays in movement trays for square bases.
Frequently asked questions
What do the bases need to stay in place?
A magnet underneath. Our 30×60 mm cavalry bases have two recesses for 4 × 2 mm magnets.
Is there a tray for units of 10, 15 or 20 models?
Yes. For 10: five wide and two deep, ten in a single rank, or two wide and five deep. For 15: five wide and three deep, or three wide and five deep. For 20: five wide and four deep, ten wide and two deep, or four wide and five deep.
120×30 mm tray for 2 cavalry models on 30×60 mm bases in a single file of 2.
Or 4 miniatures on 30 mm bases in a single file of 4.
Turned through 90°, it takes 4 miniatures on 30 mm bases in a single rank.
Narrow and long, with the essentials: 3D-printed PLA, a 0.6 mm galvanised steel sheet that keeps magnetised bases still even if the tray tips or is knocked, with the paint protected, and hidden magnets to stay on the metal shelves of a carry case. Its 2 mm border barely widens the file, allows precise moves, takes up very little room and keeps the game fair.
Designed for Warhammer: The Old World.
In column, one wide and two deep: 2 Chaos Knights in file; turned, four wide in a single rank: 4 Chaos Warriors, in The Old World.
180×30 mm tray for 3 cavalry models on 30×60 mm bases in a single file of 3.
Or 6 miniatures on 30 mm bases in a single file of 6.
Turned through 90°, it takes 6 miniatures on 30 mm bases in a single rank.
Three riders in single file on a 0.6 mm galvanised steel sheet: magnetised bases keep their grip even if the tray is tilted or knocked, and the paint is preserved. The body is 3D-printed PLA with hidden magnets for the metal shelves of a carry case. With a 2 mm border, it moves precisely, takes little room and keeps the game fair.
Designed for Warhammer: The Old World.
In column, one wide and three deep: 3 Dark Elf Dark Riders in The Old World. Turned, six wide in a single rank: 6 Chosen Chaos Warriors in The Old World.
240×30 mm tray for 4 cavalry models on 30×60 mm bases in a single file of 4.
Or 8 miniatures on 30 mm bases in a single file of 8.
Turned through 90°, it takes 8 miniatures on 30 mm bases in a single rank.
A column of four riders needs everything to stay put: the 0.6 mm galvanised steel sheet holds magnetised bases through knocks and tilts, with the paint kept safe. In transit, hidden magnets keep it fixed on the metal shelves of a carry case. A 3D-printed PLA body and a 2 mm border: precision when advancing, minimal space and a game kept fair.
Designed for Warhammer: The Old World.
In column, one wide and four deep: 4 Empire Outriders in The Old World. Turned, eight wide in a single rank: 8 Bloodletters of Khorne in The Old World.
300×30 mm tray for 5 cavalry models on 30×60 mm bases in a single file of 5.
Or 10 miniatures on 30 mm bases in a single file of 10.
Turned through 90°, it takes 10 miniatures on 30 mm bases in a single rank.
A single file of five riders on 3D-printed PLA faced with a 0.6 mm galvanised steel sheet: every magnetised base stays still when the tray twists or takes a knock, so the miniatures keep their paint. Inside are hidden magnets that fix it to the metal shelves of a carry case. Its 2 mm border keeps it narrow, allows precise placement, takes very little room and keeps the game fair.
Designed for Warhammer: The Old World.
In column, one wide and five deep: 5 Wood Elf Wild Riders in The Old World. Turned, ten wide in a single rank: 10 Plaguebearers of Nurgle in The Old World.
120×60 mm tray for 4 cavalry models on 30×60 mm bases in 2 ranks of 2.
Or 8 miniatures on 30 mm bases in 4 ranks of 2 (The Old World).
Or 18 miniatures on 20 mm bases in 6 ranks of 3 (WHFB, Reforged and The Ninth Age).
A two-by-two block can be carried in one hand, and that is where grip shows: the 0.6 mm galvanised steel sheet keeps the magnetised bases in place even if the tray is tilted or knocked, protecting the paint on every miniature. It holds hidden magnets for the metal shelves of a carry case. A 3D-printed PLA body and a 2 mm border: it sets down precisely, is barely bulky and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Two wide and two deep: 4 Vampire Counts Blood Knights in The Old World.
180×60 mm tray for 6 cavalry models on 30×60 mm bases in 3 ranks of 2.
Or 12 miniatures on 30 mm bases in 6 ranks of 2 (The Old World).
Or 27 miniatures on 20 mm bases in 9 ranks of 3 (WHFB, Reforged and The Ninth Age).
Turned through 90°, it takes 6 cavalry models on 30×60 mm bases in a single rank (The Old World), 12 miniatures on 30 mm bases in 2 ranks of 6 (The Old World) or 27 miniatures on 20 mm bases in 3 ranks of 9 (WHFB, Reforged and The Ninth Age).
In a column two wide or turned into a line, the tray behaves the same: the 0.6 mm galvanised steel sheet holds magnetised bases even if it is knocked or tilted, with the paint sheltered, and hidden magnets keep it stuck to the metal shelves of a carry case. A 3D-printed PLA base; a 2 mm border to move it exactly, store it in little space and keep the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Two wide and three deep: 6 Dark Elf Cold One Knights in The Old World; turned, the same 6 in a single rank.
240×60 mm tray for 8 cavalry models on 30×60 mm bases in 4 ranks of 2.
Or 16 miniatures on 30 mm bases in 8 ranks of 2 (The Old World).
Or 36 miniatures on 20 mm bases in 12 ranks of 3 (WHFB, Reforged and The Ninth Age).
Turned through 90°, it takes 8 cavalry models on 30×60 mm bases in a single rank (The Old World), 6 miniatures on 40×60 mm bases in a single rank, 16 miniatures on 30 mm bases in 2 ranks of 8 (The Old World) or 36 miniatures on 20 mm bases in 3 ranks of 12 (WHFB, Reforged and The Ninth Age).
Thought of as a marching column: eight riders two abreast on a 0.6 mm galvanised steel sheet that holds them by their magnets even if the tray tips or is knocked, looking after the paint. The 3D-printed PLA body carries hidden magnets facing the metal shelves of a carry case, and its 2 mm border lets it turn precisely, fits in little space and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Two wide and four deep: 8 Lizardmen Cold One Riders in The Old World. Turned, on 40×60 mm bases, six wide in a single rank: 6 Screamers of Tzeentch in The Old World.
300×60 mm tray for 10 cavalry models on 30×60 mm bases in 5 ranks of 2.
Or 20 miniatures on 30 mm bases in 10 ranks of 2 (The Old World).
Or 45 miniatures on 20 mm bases in 15 ranks of 3 (WHFB, Reforged and The Ninth Age).
Turned through 90°, it takes 10 cavalry models on 30×60 mm bases in a single rank (The Old World), 20 miniatures on 30 mm bases in 2 ranks of 10 (The Old World) or 45 miniatures on 20 mm bases in 3 ranks of 15 (WHFB, Reforged and The Ninth Age).
Ten riders two by two make a long column, and even so the 0.6 mm galvanised steel sheet keeps them in place if the tray is knocked or tilted, with the paint sheltered. The 3D-printed PLA holds hidden magnets that fix it to the metal shelves of a carry case, and the 2 mm border lets it move exactly, takes up hardly any room and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Two wide and five deep: 10 Empire Pistoliers in The Old World; turned, ten wide and one deep.
90×60 mm tray for 3 cavalry models on 30×60 mm bases in a single rank.
Or 6 miniatures on 30 mm bases in 2 ranks of 3.
Small but complete: the 0.6 mm galvanised steel sheet holds the magnetised bases even if the tray is knocked or tipped, looking after each paint job, and underneath it carries hidden magnets that stick it to the metal shelves of a carry case. The rest is 3D-printed PLA with a 2 mm border: precise moves, little bulk and a fair game.
Designed for Warhammer: The Old World.
Three wide in a single rank: 3 Bretonnian Grail Knights in The Old World. On 30 mm bases, three wide and two deep: 6 Saurus Warriors in The Old World.
120×90 mm tray for 6 cavalry models on 30×60 mm bases in 2 ranks of 3.
Or 12 miniatures on 30 mm bases in 4 ranks of 3.
Half a dozen riders, three to a rank: the tray is 3D-printed PLA and its top face a 0.6 mm galvanised steel sheet. Magnetised bases stay stuck there even if the tray tips or takes a knock, and the paint is preserved. Below wait the hidden magnets, ready for the metal shelves of a carry case. The edge, a 2 mm border, makes precise adjustments on the table easy, takes little room in the case and keeps the game fair.
Designed for Warhammer: The Old World.
Three wide and two deep: 6 High Elf Silver Helms in The Old World. On 30 mm bases, three wide and four deep: 12 Lizardmen Temple Guard in The Old World.
180×90 mm tray for 9 cavalry models on 30×60 mm bases in 3 ranks of 3.
Or 18 miniatures on 30 mm bases in 6 ranks of 3.
Nine riders in three ranks make a compact block that needs to be held well: the 0.6 mm galvanised steel sheet does it, keeping magnetised bases in place through tilts and knocks and preserving the paint. Underneath, hidden magnets that tie it to the metal shelves of a carry case. A 3D-printed PLA body; a 2 mm border that fits precisely, saves space and keeps the game fair.
Designed for Warhammer: The Old World.
Three wide and three deep: 9 Flesh Hounds of Khorne in The Old World. On 30 mm bases, three wide and six deep: a Black Orc Mob of 18 in The Old World.
240×90 mm tray for 12 cavalry models on 30×60 mm bases in 4 ranks of 3.
Or 24 miniatures on 30 mm bases in 8 ranks of 3.
Turned through 90°, it takes 24 miniatures on 30 mm bases in 3 ranks of 8.
Twelve riders in a column of three: the 0.6 mm galvanised steel sheet keeps every magnetised base where it is, even if the tray is tilted or knocked, and protects the paint. Underneath, hidden magnets in the 3D-printed PLA that fix it to the metal shelves of a carry case; along the sides, a 2 mm border that allows precise manoeuvres, takes little room and keeps the game fair.
Designed for Warhammer: The Old World.
Three wide and four deep: the right column for a unit of Chaos Knights or Empire Knights in The Old World.
300×90 mm tray for 15 cavalry models on 30×60 mm bases in 5 ranks of 3.
Or 30 miniatures on 30 mm bases in 10 ranks of 3.
Turned through 90°, it takes 30 miniatures on 30 mm bases in 3 ranks of 10.
Fifteen riders in a column of three: a long formation that lifts off the table in one piece. The 0.6 mm galvanised steel sheet holds their magnetised bases if there is a knock or the tray tilts while being moved, protecting the paint; the 3D-printed PLA carries hidden magnets that hold it to the metal shelves of a carry case; and the 2 mm border brings accuracy, cuts bulk and keeps the game fair.
Designed for Warhammer: The Old World.
Three wide and five deep: room for 15 bases of 30×60 mm, like those of the Vampire Counts Black Knights or Blood Knights, in The Old World.
120×60 mm tray for 4 cavalry models on 30×60 mm bases in a single rank.
Or 3 miniatures on 40×60 mm bases in a single rank.
Or 8 miniatures on 30 mm bases in 2 ranks of 4 (The Old World).
Or 18 miniatures on 20 mm bases in 3 ranks of 6 (WHFB, Reforged and The Ninth Age).
One plate, several uses, and in all of them the 0.6 mm galvanised steel sheet does the same job: gripping magnetised bases even if there is a knock or the tray tips, and protecting the paint. Beneath it, a 3D-printed PLA body with hidden magnets for the metal shelves of a carry case, and around it, a 2 mm border that makes precise moves easy, reduces bulk and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Four wide in a single rank: 4 Bretonnian Mounted Knights of the Realm in The Old World. On 40×60 mm bases, 3 Pegasus Knights, also Bretonnian, in a single rank in The Old World.
120×120 mm tray for 8 cavalry models on 30×60 mm bases in 2 ranks of 4.
Or, with other bases:
- 6 miniatures on 40×60 mm bases in 2 ranks of 3
- 9 miniatures on 40×40 mm bases in 3 ranks of 3
- 16 miniatures on 30 mm bases in 4 ranks of 4 (The Old World)
- 36 miniatures on 20 mm bases in 6 ranks of 6 (WHFB, Reforged and The Ninth Age)
Square and versatile, it takes bases of five sizes, and all of them grip its 0.6 mm galvanised steel sheet alike if magnetised: firm even if the tray is knocked or tilted, with the paint safe. Under the sheet, hidden magnets that seek the metal shelves of a carry case; around the 3D-printed PLA, a 2 mm border that gives precision, saves space and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Four wide and two deep: 8 Empire Inner Circle Knights in The Old World. On 40×40 mm bases, three wide and three deep: 9 Ogre Kingdoms Ogre Bulls, in The Old World.
180×120 mm tray for 12 cavalry models on 30×60 mm bases in 3 ranks of 4.
Or 9 miniatures on 40×60 mm bases in 3 ranks of 3.
Or 24 miniatures on 30 mm bases in 6 ranks of 4 (The Old World).
Or 54 miniatures on 20 mm bases in 9 ranks of 6 (WHFB, Reforged and The Ninth Age).
Three ranks of four riders and other possible bases, all on the same 0.6 mm galvanised steel sheet: a magnet in the base is enough for it to ride out knocks and tilts of the tray, caring for the paint. Below, the 3D-printed PLA houses hidden magnets for the metal shelves of a carry case, and the 2 mm border makes the tray precise, compact and fair to the game.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Four wide and three deep: 12 Seekers of Slaanesh in The Old World. On 40×60 mm bases, three wide and three deep: 9 Bretonnian Pegasus Knights in The Old World.
240×120 mm tray for 16 cavalry models on 30×60 mm bases in 4 ranks of 4.
Or, with other bases:
- 12 miniatures on 40×60 mm bases in 4 ranks of 3
- 18 miniatures on 40×40 mm bases in 6 ranks of 3
- 32 miniatures on 30 mm bases in 8 ranks of 4 (The Old World)
- 72 miniatures on 20 mm bases in 12 ranks of 6 (WHFB, Reforged and The Ninth Age)
A 240×120 mm plate with room for very different bases, and the 0.6 mm galvanised steel sheet treats them all alike: if magnetised, they ride out knocks and tilts and the paint comes to no harm. Underneath, 3D-printed PLA with hidden magnets that stick to the metal shelves of a carry case. Around it, a 2 mm border: a precise formation, a roomier case and a fair game.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Four wide and four deep: room for 16 bases of 30×60 mm, like those of the High Elf Dragon Princes or Silver Helms, in The Old World.
300×120 mm tray for 20 cavalry models on 30×60 mm bases in 5 ranks of 4.
Or 15 miniatures on 40×60 mm bases in 5 ranks of 3.
Or 40 miniatures on 30 mm bases in 10 ranks of 4 (The Old World).
Or 90 miniatures on 20 mm bases in 15 ranks of 6 (WHFB, Reforged and The Ninth Age).
Turned through 90°, it takes 20 cavalry models on 30×60 mm bases in 2 ranks of 10 (The Old World), 40 miniatures on 30 mm bases in 4 ranks of 10 (The Old World) or 90 miniatures on 20 mm bases in 6 ranks of 15 (WHFB, Reforged and The Ninth Age).
Twenty riders in a column of four, or ten wide when turned: either way, the 0.6 mm galvanised steel sheet holds every magnetised base through knocks and tilts and shelters the paint. Beneath it, a 3D-printed PLA body with hidden magnets for the metal shelves of a carry case; around the edge, a 2 mm border: precise manoeuvres, little room taken and a fair game.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Four wide and five deep: room for 20 bases of 30×60 mm, like those of the Bretonnian Knights Errant or Mounted Knights of the Realm, in The Old World; turned, ten wide and two deep.
150×60 mm tray for 5 cavalry models on 30×60 mm bases in a single rank.
Or 10 miniatures on 30 mm bases in 2 ranks of 5.
This magnetic movement tray for a rank of five riders pairs a 3D-printed PLA body with a 0.6 mm galvanised steel sheet: magnetised bases hold their place even if the tray is tilted or knocked during a charge, and the paint is grateful for it. Its hidden magnets anchor it to the metal shelves of a carry case, and the 2 mm border helps it manoeuvre precisely, takes up less room and keeps the game fair.
Designed for Warhammer: The Old World.
Five wide in a single rank: a unit of Empire Knights or 5 Bretonnian Knights Errant in The Old World. On 30 mm bases, five wide and two deep: 10 Chaos Warriors in The Old World.
150×120 mm tray for 10 cavalry models on 30×60 mm bases in 2 ranks of 5.
Or 20 miniatures on 30 mm bases in 4 ranks of 5.
Two ranks of five riders travel together on a 0.6 mm galvanised steel sheet, which their magnetised bases grip even if the tray is knocked or tipped, and the paint comes off well. The 3D-printed PLA base carries hidden magnets that stick it to the metal shelves of a carry case, and the 2 mm border makes each move precise, reduces bulk and keeps the game fair.
Designed for Warhammer: The Old World.
Five wide and two deep: 10 Bretonnian Questing Knights or a Centigor Herd of 10, in The Old World. On 30 mm bases, five wide and four deep: 20 Saurus Warriors in The Old World.
180×150 mm tray for 15 cavalry models on 30×60 mm bases in 3 ranks of 5.
Or 30 miniatures on 30 mm bases in 6 ranks of 5.
Five wide and three ranks, with the 0.6 mm galvanised steel sheet acting as an anchor: every magnetised base stays in its place even if the tray tips or takes a knock, and the paint reaches the game protected. The hidden magnets in the 3D-printed PLA keep it stuck to the metal shelves of a carry case. The 2 mm border lets it be moved with millimetre precision, takes little room and keeps the game fair.
Designed for Warhammer: The Old World.
Five wide and three deep: room for 15 bases of 30×60 mm, like those of the Chosen Chaos Knights or Chaos Knights, in The Old World.
240×150 mm tray for 20 cavalry models on 30×60 mm bases in 4 ranks of 5.
Or 40 miniatures on 30 mm bases in 8 ranks of 5.
Four ranks of five on the same 0.6 mm galvanised steel sheet surface: the whole unit moves with every magnetised base in its place, even if the tray is tilted or knocked, and with the paint cared for. The plate is 3D-printed PLA and holds on with hidden magnets to the metal shelves of a carry case; its 2 mm border adds precision, subtracts bulk and keeps the game fair.
Designed for Warhammer: The Old World.
Five wide and four deep: room for 20 bases of 30×60 mm, like those of the Flesh Hounds of Khorne or Seekers of Slaanesh, in The Old World.
300×150 mm tray for 25 cavalry models on 30×60 mm bases in 5 ranks of 5.
Or, with other bases:
- 36 cavalry models on 25×50 mm bases in 6 ranks of 6
- 12 miniatures on 50×75 mm bases in 4 ranks of 3
- 9 chariots or monstrous cavalry models on 50×100 mm bases in 3 ranks of 3
- 18 miniatures on 50×50 mm bases in 6 ranks of 3
- 50 miniatures on 30 mm bases in 10 ranks of 5 (The Old World)
- 72 miniatures on 25 mm bases in 12 ranks of 6
It takes six bases besides its own, and all of them hold to the same 0.6 mm galvanised steel sheet if magnetised: firm through knocks and tilts, with the paint sheltered. Underneath, 3D-printed PLA and hidden magnets that fix it to the metal shelves of a carry case. The 2 mm border lets the block be placed precisely, take up just the room it needs and keep the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Five wide and five deep: room for 25 bases of 30×60 mm, like those of the Chaos Knights, in The Old World. On 50×75 mm bases, three wide and four deep: 12 Empire Demigryph Knights, in The Old World.
180×60 mm tray for 6 cavalry models on 30×60 mm bases in a single rank.
Or 12 miniatures on 30 mm bases in 2 ranks of 6 (The Old World).
Or 27 miniatures on 20 mm bases in 3 ranks of 9 (WHFB, Reforged and The Ninth Age).
Six riders in a line need a straight, firm base. The 3D-printed PLA provides it, covered with a 0.6 mm galvanised steel sheet where magnetised bases ride out tilts and knocks without the paint suffering. For transport, hidden magnets hold it to the metal shelves of a carry case; for play, a 2 mm border that gives precision, saves room and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Six wide in a single rank: 6 High Elf Dragon Princes in The Old World.
180×120 mm tray for 12 cavalry models on 30×60 mm bases in 2 ranks of 6.
Or 24 miniatures on 30 mm bases in 4 ranks of 6 (The Old World).
Or 54 miniatures on 20 mm bases in 6 ranks of 9 (WHFB, Reforged and The Ninth Age).
Two ranks of six: the broad frontage of a heavy cavalry unit, held by a 0.6 mm galvanised steel sheet that keeps magnetised bases firm when the tray tilts or takes a knock, without putting the paint at risk. The body is 3D-printed PLA with hidden magnets that attach it to the metal shelves of a carry case. A 2 mm border finishes it off: precision, little space and a fair game.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Six wide and two deep: 12 Bretonnian Mounted Knights of the Realm in The Old World.
180×180 mm tray for 18 cavalry models on 30×60 mm bases in 3 ranks of 6.
Or 36 miniatures on 30 mm bases in 6 ranks of 6 (The Old World).
Or 81 miniatures on 20 mm bases in 9 ranks of 9 (WHFB, Reforged and The Ninth Age).
Square, 180 mm a side, and made for large blocks: the 0.6 mm galvanised steel sheet keeps magnetised bases in place if the tray is tilted or knocked, and the paint stays safe. The 3D-printed PLA incorporates hidden magnets that stick it to the metal shelves of a carry case, and the 2 mm border gives precision when moving it, makes the most of the space and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Six wide and three deep: room for 18 bases of 30×60 mm, like those of the Bretonnian Grail Knights or the Lizardmen Cold One Riders, in The Old World.
240×180 mm tray for 24 cavalry models on 30×60 mm bases in 4 ranks of 6.
Or 48 miniatures on 30 mm bases in 8 ranks of 6 (The Old World).
Or 108 miniatures on 20 mm bases in 12 ranks of 9 (WHFB, Reforged and The Ninth Age).
Twenty-four cavalry bases form a 240×180 mm block that moves in a single go. The 0.6 mm galvanised steel sheet makes it possible: with a magnet in the base, every rider rides out knocks and tilts and keeps its paint. Inside, 3D-printed PLA; underneath, hidden magnets for the metal shelves of a carry case; around it, a 2 mm border that helps the block settle precisely on the table, takes little room and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Six wide and four deep: room for 24 bases of 30×60 mm, like those of the Empire Knights or the Empire Inner Circle Knights, in The Old World.
300×180 mm tray for 30 cavalry models on 30×60 mm bases in 5 ranks of 6.
Or 60 miniatures on 30 mm bases in 10 ranks of 6 (The Old World).
Or 135 miniatures on 20 mm bases in 15 ranks of 9 (WHFB, Reforged and The Ninth Age).
Thirty riders are easier to handle as a single block: on 3D-printed PLA, the 0.6 mm galvanised steel sheet holds every magnetised base against jolts and tilts, and the miniatures' paint is kept. Hidden magnets anchor the plate to the metal shelves of a carry case. With its 2 mm border, the block sets down precisely, takes less room in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Six wide and five deep: room for 30 bases of 30×60 mm, like those of the Bretonnian Questing Knights or Grail Knights, in The Old World.
210×60 mm tray for 7 cavalry models on 30×60 mm bases in a single rank.
Or 14 miniatures on 30 mm bases in 2 ranks of 7.
Seven wide is a long rank, and the 0.6 mm galvanised steel sheet keeps it together: every magnetised base stays in place even if the tray is tilted or knocked, with the paint cared for. Underneath, 3D-printed PLA and hidden magnets that attach it to the metal shelves of a carry case. The 2 mm border adds the minimum to the frontage, allows precise moves, stores in little space and keeps the game fair.
Designed for Warhammer: The Old World.
Seven wide in a single rank: 7 Vampire Counts Black Knights in The Old World. On 30 mm bases, seven wide and two deep: 14 Pink Horrors of Tzeentch in The Old World.
210×120 mm tray for 14 cavalry models on 30×60 mm bases in 2 ranks of 7.
Or 28 miniatures on 30 mm bases in 4 ranks of 7.
Seven wide and two ranks: a 3D-printed PLA tray with a 0.6 mm galvanised steel sheet on which magnetised bases stay put through jolts and tilts, preserving the paint. Hidden magnets keep it on the metal shelves of a carry case, and the 2 mm border favours precise movement, fits in less space and keeps the game fair.
Designed for Warhammer: The Old World.
Seven wide and two deep: 14 Wood Elf Glade Riders in The Old World. On 30 mm bases, seven wide and four deep: 28 Bloodletters of Khorne in The Old World.
210×180 mm tray for 21 cavalry models on 30×60 mm bases in 3 ranks of 7.
Or 42 miniatures on 30 mm bases in 6 ranks of 7.
Seven wide and three deep, on a 0.6 mm galvanised steel sheet that gives magnetised bases firm footing: they resist knocks and tilts, and the paint stays protected. Inside, 3D-printed PLA and hidden magnets that anchor it to the metal shelves of a carry case. Outside, a 2 mm border that allows exact manoeuvres, saves room and keeps the game fair.
Designed for Warhammer: The Old World.
Seven wide and three deep: room for 21 bases of 30×60 mm, like those of the High Elf Ellyrian Reavers, in The Old World. On 30 mm bases, seven wide and six deep: 42 Plaguebearers of Nurgle in The Old World.
240×210 mm tray for 28 cavalry models on 30×60 mm bases in 4 ranks of 7.
Or 56 miniatures on 30 mm bases in 8 ranks of 7.
Four ranks of seven: a wide block that travels whole because its hidden magnets stick it to the metal shelves of a carry case, and plays whole because the 0.6 mm galvanised steel sheet holds magnetised bases through knocks or tilts, protecting the paint. 3D-printed PLA and a 2 mm border that gives precision, saves room and keeps the game fair.
Designed for Warhammer: The Old World.
Seven wide and four deep: room for 28 bases of 30×60 mm, like those of the Vampire Counts Black Knights, in The Old World.
300×210 mm tray for 35 cavalry models on 30×60 mm bases in 5 ranks of 7.
Or 70 miniatures on 30 mm bases in 10 ranks of 7.
Five ranks of seven riders fit on this 3D-printed PLA plate, and the 0.6 mm galvanised steel sheet covering it holds every magnetised base when the tray tips or is knocked, with the paint well looked after. Hidden magnets stick it to the metal shelves of a carry case; the 2 mm border keeps such a big block precise, trims the space it needs and keeps the game fair.
Designed for Warhammer: The Old World.
Seven wide and five deep: room for 35 bases of 30×60 mm, like those of the High Elf Silver Helms, in The Old World.
240×60 mm tray for 8 cavalry models on 30×60 mm bases in a single rank.
Or 6 miniatures on 40×60 mm bases in a single rank.
Or 16 miniatures on 30 mm bases in 2 ranks of 8 (The Old World).
Or 36 miniatures on 20 mm bases in 3 ranks of 12 (WHFB, Reforged and The Ninth Age).
Eight wide is a long line, and the 2 mm border adds the minimum to that length: an accurate frontage, less room in the case and a fair game. On top of the 3D-printed PLA, a 0.6 mm galvanised steel sheet keeps magnetised bases in place when there are knocks or the tray tilts, looking after the paint; underneath, hidden magnets for the metal shelves of a carry case.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Eight wide in a single rank: 8 Chaos Knights in The Old World. On 40×60 mm bases, 6 Bretonnian Pegasus Knights in a single rank, in The Old World.
240×120 mm tray for 16 cavalry models on 30×60 mm bases in 2 ranks of 8.
Or, with other bases:
- 12 miniatures on 40×60 mm bases in 2 ranks of 6
- 18 miniatures on 40×40 mm bases in 3 ranks of 6
- 32 miniatures on 30 mm bases in 4 ranks of 8 (The Old World)
- 72 miniatures on 20 mm bases in 6 ranks of 12 (WHFB, Reforged and The Ninth Age)
Eight wide and two deep is a broad formation; here it rests on a 0.6 mm galvanised steel sheet over 3D-printed PLA, which magnetised bases cling to firmly through knocks or tilts, with the paint protected. Hidden magnets tie it to the metal shelves of a carry case. Its 2 mm border lines up the frontage precisely, saves space and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Eight wide and two deep: room for 16 bases of 30×60 mm, like those of the Dark Elf Dark Riders or Cold One Knights, in The Old World. On 40×60 mm bases, six wide and two deep: 12 Screamers of Tzeentch in The Old World.
240×180 mm tray for 24 cavalry models on 30×60 mm bases in 3 ranks of 8.
Or 18 miniatures on 40×60 mm bases in 3 ranks of 6.
Or 48 miniatures on 30 mm bases in 6 ranks of 8 (The Old World).
Or 108 miniatures on 20 mm bases in 9 ranks of 12 (WHFB, Reforged and The Ninth Age).
Eight wide and three deep, with several possible bases: the 0.6 mm galvanised steel sheet holds any of them if magnetised, whether the tray tilts or takes a knock, and cares for the paint. The 3D-printed PLA body carries hidden magnets that grip the metal shelves of a carry case. With the 2 mm border, the frontage stays precise, the case roomier and the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Eight wide and three deep: room for 24 bases of 30×60 mm, like those of the Dark Elf Cold One Knights, in The Old World. On 40×60 mm bases, six wide and three deep: room for 18, like those of the Screamers of Tzeentch in The Old World.
240×240 mm tray for 32 cavalry models on 30×60 mm bases in 4 ranks of 8.
Or, with other bases:
- 24 miniatures on 40×60 mm bases in 4 ranks of 6
- 36 miniatures on 40×40 mm bases in 6 ranks of 6
- 64 miniatures on 30 mm bases in 8 ranks of 8 (The Old World)
- 144 miniatures on 20 mm bases in 12 ranks of 12 (WHFB, Reforged and The Ninth Age)
A 240 mm square takes riders and 40×60, 40×40, 30 and 20 mm bases; the 0.6 mm galvanised steel sheet makes no distinction: with a magnet, any of them stays firm even if the tray is knocked or tips, and the paint comes to no harm. Its hidden magnets, set into the 3D-printed PLA, stick it to the metal shelves of a carry case. The 2 mm border frames the block precisely, adds little bulk and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Eight wide and four deep: room for 32 bases of 30×60 mm, like those of the High Elf Dragon Princes, in The Old World. On 40×40 mm bases, six wide and six deep: room for 36, like those of the Lizardmen Kroxigor, in The Old World and WHFB.
300×240 mm tray for 40 cavalry models on 30×60 mm bases in 5 ranks of 8.
Or 30 miniatures on 40×60 mm bases in 5 ranks of 6.
Or 80 miniatures on 30 mm bases in 10 ranks of 8 (The Old World).
Or 180 miniatures on 20 mm bases in 15 ranks of 12 (WHFB, Reforged and The Ninth Age).
Forty cavalry bases in eight files and five ranks, or thirty of 40×60 mm: whichever they are, the 0.6 mm galvanised steel sheet holds them if magnetised, when the tray tilts or takes a knock, and the paint does not suffer. Inside, 3D-printed PLA and hidden magnets that fix it to the metal shelves of a carry case; outside, a 2 mm border that brings precision, gathers up the bulk and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Eight wide and five deep: room for 40 bases of 30×60 mm, like those of the Bretonnian Mounted Knights of the Realm, in The Old World. On 40×60 mm bases, six wide and five deep: room for 30, like those of the Pegasus Knights, also in The Old World.
270×60 mm tray for 9 cavalry models on 30×60 mm bases in a single rank.
Or 18 miniatures on 30 mm bases in 2 ranks of 9.
Nine wide in 3D-printed PLA, with a 0.6 mm galvanised steel sheet on top that grips every magnetised base even if the tray is tilted or knocked, so the paint is preserved. Hidden magnets hold it to the metal shelves of a carry case, and the 2 mm border keeps the frontage precise and compact while keeping the game fair.
Designed for Warhammer: The Old World.
Nine wide in a single rank: 9 High Elf Ellyrian Reavers in The Old World. On 30 mm bases, nine wide and two deep: 18 Chosen Chaos Warriors in The Old World.
270×120 mm tray for 18 cavalry models on 30×60 mm bases in 2 ranks of 9.
Or 36 miniatures on 30 mm bases in 4 ranks of 9.
Eighteen riders in two very long ranks. To keep them in order when the tray is lifted, its 0.6 mm galvanised steel sheet face holds them by their magnets, also if it tilts or takes a knock, and the paint stays sheltered. Inside the 3D-printed PLA are hidden magnets for the metal shelves of a carry case, and the 2 mm border leaves the frontage exact, saves room and keeps the game fair.
Designed for Warhammer: The Old World.
Nine wide and two deep: room for 18 bases of 30×60 mm, like those of the Empire Outriders or Pistoliers, in The Old World. On 30 mm bases, nine wide and four deep: 36 Chaos Warriors in The Old World.
270×180 mm tray for 27 cavalry models on 30×60 mm bases in 3 ranks of 9.
Or 54 miniatures on 30 mm bases in 6 ranks of 9.
Nine wide and three ranks deep: 270 mm of 3D-printed PLA under a 0.6 mm galvanised steel sheet that keeps magnetised bases firm when the tray is knocked or tipped, with the paint cared for. Hidden magnets anchor it to the metal shelves of a carry case. The 2 mm border adds next to nothing to the frontage, takes little room, lets it be placed exactly and keeps the game fair.
Designed for Warhammer: The Old World.
Nine wide and three deep: room for 27 bases of 30×60 mm, like those of the Wood Elf Glade Riders or Wild Riders, in The Old World.
270×240 mm tray for 36 cavalry models on 30×60 mm bases in 4 ranks of 9.
Or 72 miniatures on 30 mm bases in 8 ranks of 9.
Nine wide and four ranks: moving something this big in one go needs everything to stay in place, and the 0.6 mm galvanised steel sheet sees to it, holding magnetised bases through knocks and tilts and sheltering the paint. 3D-printed PLA inside, hidden magnets facing the metal shelves of a carry case and a 2 mm border that gives accuracy, saves room and keeps the game fair.
Designed for Warhammer: The Old World.
Nine wide and four deep: room for 36 bases of 30×60 mm, like those of the Vampire Counts Blood Knights, in The Old World.
300×270 mm tray for 45 cavalry models on 30×60 mm bases in 5 ranks of 9.
Or 90 miniatures on 30 mm bases in 10 ranks of 9.
Forty-five riders in one go. The 0.6 mm galvanised steel sheet surface grips every base by its magnet, whether the tray tilts or is knocked, so the paint travels protected. Underneath, 3D-printed PLA with hidden magnets that seek the metal shelves of a carry case. A 2 mm border closes it off, taking almost no room, allowing precise placement and keeping the game fair.
Designed for Warhammer: The Old World.
Nine wide and five deep: room for 45 bases of 30×60 mm, like those of a Beastmen Centigor Herd, in The Old World.
300×60 mm tray for 10 cavalry models on 30×60 mm bases in a single rank.
Or 20 miniatures on 30 mm bases in 2 ranks of 10 (The Old World).
Or 45 miniatures on 20 mm bases in 3 ranks of 15 (WHFB, Reforged and The Ninth Age).
Thirty centimetres of frontage, ten riders in a rank, and the 0.6 mm galvanised steel sheet holds them all: even if the tray tilts or bumps, the magnetised bases stay in place and the paint in good shape. Its hidden magnets, inside the 3D-printed PLA, fix it to the metal shelves of a carry case. The 2 mm border keeps the rank precisely aligned, with little bulk and a fair game.
Designed for Warhammer: The Old World.
Ten wide in a single rank: 10 Warriors of Chaos Marauder Horsemen in The Old World.
300×120 mm tray for 20 cavalry models on 30×60 mm bases in 2 ranks of 10.
Or 40 miniatures on 30 mm bases in 4 ranks of 10 (The Old World).
Or 90 miniatures on 20 mm bases in 6 ranks of 15 (WHFB, Reforged and The Ninth Age).
Ten riders abreast in two ranks form a 300 mm line that moves in one go: the 0.6 mm galvanised steel sheet keeps them in formation through knocks and when the tray is tilted, looking after the paint. The hidden magnets in the 3D-printed PLA hold it to the metal shelves of a carry case, and the 2 mm border adds very little to that line, allows precise placement, saves space and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Ten wide and two deep: room for 20 bases of 30×60 mm, like those of the Warriors of Chaos Marauder Horsemen or an Orc Boar Boy Mob, in The Old World.
300×180 mm tray for 30 cavalry models on 30×60 mm bases in 3 ranks of 10.
Or 60 miniatures on 30 mm bases in 6 ranks of 10 (The Old World).
Or 135 miniatures on 20 mm bases in 9 ranks of 15 (WHFB, Reforged and The Ninth Age).
Ten wide and three deep on a single plate of 3D-printed PLA, covered with a 0.6 mm galvanised steel sheet: magnetised bases hold their place through knocks and tilts, and the paint comes out protected. Hidden magnets keep it held to the metal shelves of a carry case on the way, and in the game the 2 mm border sets the frontage precisely, needs little space in the case and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Ten wide and three deep: room for 30 bases of 30×60 mm, like those of the Chosen Chaos Knights, in The Old World.
300×240 mm tray for 40 cavalry models on 30×60 mm bases in 4 ranks of 10.
Or 80 miniatures on 30 mm bases in 8 ranks of 10 (The Old World).
Or 180 miniatures on 20 mm bases in 12 ranks of 15 (WHFB, Reforged and The Ninth Age).
With ten riders a rank and four ranks, this 3D-printed PLA plate needs a good grip, and its 0.6 mm galvanised steel sheet provides it: magnetised bases resist knocks and tilts and the paint is protected. For storage, hidden magnets that keep it still on the metal shelves of a carry case. For the table, a 2 mm border that keeps the frontage precise, takes little room and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Ten wide and four deep: room for 40 bases of 30×60 mm, like those of the Dark Elf Dark Riders, in The Old World.
300×300 mm tray for 50 cavalry models on 30×60 mm bases in 5 ranks of 10.
Or, with other bases:
- 72 cavalry models on 25×50 mm bases in 6 ranks of 12
- 24 miniatures on 50×75 mm bases in 4 ranks of 6
- 18 chariots or monstrous cavalry models on 50×100 mm bases in 3 ranks of 6
- 36 miniatures on 50×50 mm bases in 6 ranks of 6
- 100 miniatures on 30 mm bases in 10 ranks of 10 (The Old World)
- 144 miniatures on 25 mm bases in 12 ranks of 12
- 225 miniatures on 20 mm bases in 15 ranks of 15 (WHFB, Reforged and The Ninth Age)
The largest on this page: 300 mm a side of 3D-printed PLA and 0.6 mm galvanised steel sheet, with room for eight kinds of base. If magnetised, all of them stay firm when the tray is knocked or tilted, with the paint cared for. Hidden magnets fix it to the metal shelves of a carry case, and its 2 mm border lets it move precisely, takes minimal room and keeps the game fair.
Compatible with Warhammer: The Old World, Warhammer Fantasy Battles (6th and 8th editions), Warhammer Fantasy Reforged and The Ninth Age.
Ten wide and five deep: room for 50 bases of 30×60 mm, like those of the Chaos Knights or Chosen Chaos Knights, in The Old World.
View full details
