Adapted MDF Movement Tray, 20 to 25 mm Bases, for The Old World
Adapted MDF Movement Tray, 20 to 25 mm Bases, for The Old World
Formation
Couldn't load pickup availability
20 to 25 mm adapted movement tray for Warhammer: The Old World. It holds miniatures on 20 mm square bases from Warhammer Fantasy, spaced as if they were on 25 mm bases, with no rebasing.
What it is
It is a laser-cut MDF grid glued onto an MDF plate. Each cell is 25×25 mm, the base size in The Old World, with a recess for a 20 mm base. Engraved marks on the edge of each cell show where the 25 mm base would end. The plate matches the formation, 25 mm per model in width and depth, with no outer border.
What it is for
In The Old World, much of the infantry that used 20 mm bases in Warhammer Fantasy uses 25 mm bases, so units gain frontage and depth. On this tray, the unit covers the same area on the table as on 25 mm bases, and the models stay on their original bases.
Formations
There are 48 formations, from 3 to 60 models: 3 to 10 wide and 1 to 6 deep. The plate ranges from 75×25 mm, three in a rank, to 250×150 mm, ten wide and six deep. For example, five wide and four deep, for 20 models, takes up 125×100 mm.
Units
Some units that used 20 mm bases in Warhammer Fantasy and use 25 mm bases in The Old World: Dwarf Warriors; Bretonnian Men-at-Arms; Vampire Counts Zombies; Dark Elf Witch Elves.
Common questions
Do the models have to come off their bases?
No. Each model goes into its recess on its 20 mm base.
Is there a version for an existing 25 mm tray?
Yes: the 20 to 25 mm tray adapter is the same grid without the plate, to place on a 25×25 mm tray of the same formation, magnetic or MDF.
More trays in movement trays for square bases.
20 to 25 mm adapted movement tray for Warhammer: The Old World. It holds miniatures on 20 mm square bases from Warhammer Fantasy, spaced as if they were on 25 mm bases, with no rebasing.
What it is
It is a laser-cut MDF grid glued onto an MDF plate. Each cell is 25×25 mm, the base size in The Old World, with a recess for a 20 mm base. Engraved marks on the edge of each cell show where the 25 mm base would end. The plate matches the formation, 25 mm per model in width and depth, with no outer border.
What it is for
In The Old World, much of the infantry that used 20 mm bases in Warhammer Fantasy uses 25 mm bases, so units gain frontage and depth. On this tray, the unit covers the same area on the table as on 25 mm bases, and the models stay on their original bases.
Formations
There are 48 formations, from 3 to 60 models: 3 to 10 wide and 1 to 6 deep. The plate ranges from 75×25 mm, three in a rank, to 250×150 mm, ten wide and six deep. For example, five wide and four deep, for 20 models, takes up 125×100 mm.
Units
Some units that used 20 mm bases in Warhammer Fantasy and use 25 mm bases in The Old World: Dwarf Warriors; Bretonnian Men-at-Arms; Vampire Counts Zombies; Dark Elf Witch Elves.
Common questions
Do the models have to come off their bases?
No. Each model goes into its recess on its 20 mm base.
Is there a version for an existing 25 mm tray?
Yes: the 20 to 25 mm tray adapter is the same grid without the plate, to place on a 25×25 mm tray of the same formation, magnetic or MDF.
More trays in movement trays for square bases.
75×25 mm adapted tray for 3 miniatures on 20 mm bases in a single rank, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
75×50 mm adapted tray for 6 miniatures on 20 mm bases in 2 ranks of 3, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
75×75 mm adapted tray for 9 miniatures on 20 mm bases in 3 ranks of 3, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
100×75 mm adapted tray for 12 miniatures on 20 mm bases in 4 ranks of 3, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
125×75 mm adapted tray for 15 miniatures on 20 mm bases in 5 ranks of 3, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
150×75 mm adapted tray for 18 miniatures on 20 mm bases in 6 ranks of 3, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
100×25 mm adapted tray for 4 miniatures on 20 mm bases in a single rank, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
100×50 mm adapted tray for 8 miniatures on 20 mm bases in 2 ranks of 4, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
100×75 mm adapted tray for 12 miniatures on 20 mm bases in 3 ranks of 4, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
100×100 mm adapted tray for 16 miniatures on 20 mm bases in 4 ranks of 4, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
125×100 mm adapted tray for 20 miniatures on 20 mm bases in 5 ranks of 4, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
150×100 mm adapted tray for 24 miniatures on 20 mm bases in 6 ranks of 4, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
125×25 mm adapted tray for 5 miniatures on 20 mm bases in a single rank, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
125×50 mm adapted tray for 10 miniatures on 20 mm bases in 2 ranks of 5, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
125×75 mm adapted tray for 15 miniatures on 20 mm bases in 3 ranks of 5, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
125×100 mm adapted tray for 20 miniatures on 20 mm bases in 4 ranks of 5, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
125×125 mm adapted tray for 25 miniatures on 20 mm bases in 5 ranks of 5, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
150×125 mm adapted tray for 30 miniatures on 20 mm bases in 6 ranks of 5, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
150×25 mm adapted tray for 6 miniatures on 20 mm bases in a single rank, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
150×50 mm adapted tray for 12 miniatures on 20 mm bases in 2 ranks of 6, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
150×75 mm adapted tray for 18 miniatures on 20 mm bases in 3 ranks of 6, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
150×100 mm adapted tray for 24 miniatures on 20 mm bases in 4 ranks of 6, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
150×125 mm adapted tray for 30 miniatures on 20 mm bases in 5 ranks of 6, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
150×150 mm adapted tray for 36 miniatures on 20 mm bases in 6 ranks of 6, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
175×25 mm adapted tray for 7 miniatures on 20 mm bases in a single rank, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
175×50 mm adapted tray for 14 miniatures on 20 mm bases in 2 ranks of 7, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
175×75 mm adapted tray for 21 miniatures on 20 mm bases in 3 ranks of 7, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
175×100 mm adapted tray for 28 miniatures on 20 mm bases in 4 ranks of 7, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
175×125 mm adapted tray for 35 miniatures on 20 mm bases in 5 ranks of 7, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
175×150 mm adapted tray for 42 miniatures on 20 mm bases in 6 ranks of 7, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
200×25 mm adapted tray for 8 miniatures on 20 mm bases in a single rank, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
200×50 mm adapted tray for 16 miniatures on 20 mm bases in 2 ranks of 8, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
200×75 mm adapted tray for 24 miniatures on 20 mm bases in 3 ranks of 8, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
200×100 mm adapted tray for 32 miniatures on 20 mm bases in 4 ranks of 8, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
200×125 mm adapted tray for 40 miniatures on 20 mm bases in 5 ranks of 8, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
200×150 mm adapted tray for 48 miniatures on 20 mm bases in 6 ranks of 8, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
225×25 mm adapted tray for 9 miniatures on 20 mm bases in a single rank, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
225×50 mm adapted tray for 18 miniatures on 20 mm bases in 2 ranks of 9, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
225×75 mm adapted tray for 27 miniatures on 20 mm bases in 3 ranks of 9, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
225×100 mm adapted tray for 36 miniatures on 20 mm bases in 4 ranks of 9, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
225×125 mm adapted tray for 45 miniatures on 20 mm bases in 5 ranks of 9, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
225×150 mm adapted tray for 54 miniatures on 20 mm bases in 6 ranks of 9, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
250×25 mm adapted tray for 10 miniatures on 20 mm bases in a single rank, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
250×50 mm adapted tray for 20 miniatures on 20 mm bases in 2 ranks of 10, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
250×75 mm adapted tray for 30 miniatures on 20 mm bases in 3 ranks of 10, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
250×100 mm adapted tray for 40 miniatures on 20 mm bases in 4 ranks of 10, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
250×125 mm adapted tray for 50 miniatures on 20 mm bases in 5 ranks of 10, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
250×150 mm adapted tray for 60 miniatures on 20 mm bases in 6 ranks of 10, spaced for 25 mm bases.
A laser-cut MDF grid glued onto an MDF plate: 25×25 mm cells, each with a recess for a 20 mm base and engraved marks where the 25 mm base would end. The plate matches the formation, with no outer border, and the models stay on their bases.
View full details
