20 to 25 mm Movement Tray Adapter for The Old World
20 to 25 mm Movement Tray Adapter for The Old World
Formation
Couldn't load pickup availability
The 20 to 25 mm tray adapter is a laser-cut MDF grid for playing Warhammer: The Old World with Warhammer Fantasy Battles miniatures on 20×20 mm bases, without rebasing them.
How it works
Each space in the grid is 25×25 mm, the base size in The Old World, with a recess inside that fits a 20×20 mm base. The grid sits on top of a movement tray for 25×25 mm bases with the same columns and ranks, and the unit takes up the same room on the table as on 25 mm bases. Laser-engraved marks show the edge of each space. It can be used loose or glued to the tray with superglue.
On the magnetic tray
All 80 adapter formations exist as a magnetic movement tray for 25×25 mm bases. The grid is open, so each base rests on the tray's steel sheet, and the hidden magnets hold it to the metal shelves of a carry case.
Available formations
There are 80 formations, from 3 to 10 columns and from 1 to 10 ranks: 3 to 100 miniatures, with grids from 75×25 to 250×250 mm. For example:
- Three wide in a single rank: 3 miniatures (75×25 mm).
- Five wide and four deep: 20 miniatures (125×100 mm).
- Six wide and five deep: 30 miniatures (150×125 mm).
- Ten wide and ten deep: 100 miniatures (250×250 mm).
Units
Units that used 20 mm bases in Warhammer Fantasy and use 25 mm bases in The Old World include Empire Flagellants, Dwarf Slayers, High Elf Phoenix Guard and Vampire Counts Crypt Ghouls.
Common questions
Which tray do I need?
One for 25×25 mm bases with the same columns and ranks: the 5×4 grid, 125×100 mm, sits on the 5×4 tray for 25 mm bases.
Is there a ready-assembled version?
Yes: the 20 to 25 mm adapted movement tray is this same grid glued onto an MDF plate.
More movement trays for Warhammer in movement trays for square bases.
The 20 to 25 mm tray adapter is a laser-cut MDF grid for playing Warhammer: The Old World with Warhammer Fantasy Battles miniatures on 20×20 mm bases, without rebasing them.
How it works
Each space in the grid is 25×25 mm, the base size in The Old World, with a recess inside that fits a 20×20 mm base. The grid sits on top of a movement tray for 25×25 mm bases with the same columns and ranks, and the unit takes up the same room on the table as on 25 mm bases. Laser-engraved marks show the edge of each space. It can be used loose or glued to the tray with superglue.
On the magnetic tray
All 80 adapter formations exist as a magnetic movement tray for 25×25 mm bases. The grid is open, so each base rests on the tray's steel sheet, and the hidden magnets hold it to the metal shelves of a carry case.
Available formations
There are 80 formations, from 3 to 10 columns and from 1 to 10 ranks: 3 to 100 miniatures, with grids from 75×25 to 250×250 mm. For example:
- Three wide in a single rank: 3 miniatures (75×25 mm).
- Five wide and four deep: 20 miniatures (125×100 mm).
- Six wide and five deep: 30 miniatures (150×125 mm).
- Ten wide and ten deep: 100 miniatures (250×250 mm).
Units
Units that used 20 mm bases in Warhammer Fantasy and use 25 mm bases in The Old World include Empire Flagellants, Dwarf Slayers, High Elf Phoenix Guard and Vampire Counts Crypt Ghouls.
Common questions
Which tray do I need?
One for 25×25 mm bases with the same columns and ranks: the 5×4 grid, 125×100 mm, sits on the 5×4 tray for 25 mm bases.
Is there a ready-assembled version?
Yes: the 20 to 25 mm adapted movement tray is this same grid glued onto an MDF plate.
More movement trays for Warhammer in movement trays for square bases.
75×25 mm tray adapter for 3 miniatures on 20×20 mm bases in a single rank of 3, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 75×25 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
75×50 mm tray adapter for 6 miniatures on 20×20 mm bases in 2 ranks of 3, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 75×50 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
75×75 mm tray adapter for 9 miniatures on 20×20 mm bases in 3 ranks of 3, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 75×75 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
75×100 mm tray adapter for 12 miniatures on 20×20 mm bases in 4 ranks of 3, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 75×100 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
75×125 mm tray adapter for 15 miniatures on 20×20 mm bases in 5 ranks of 3, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 75×125 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
75×150 mm tray adapter for 18 miniatures on 20×20 mm bases in 6 ranks of 3, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 75×150 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
75×175 mm tray adapter for 21 miniatures on 20×20 mm bases in 7 ranks of 3, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 75×175 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
75×200 mm tray adapter for 24 miniatures on 20×20 mm bases in 8 ranks of 3, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 75×200 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
75×225 mm tray adapter for 27 miniatures on 20×20 mm bases in 9 ranks of 3, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 75×225 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
75×250 mm tray adapter for 30 miniatures on 20×20 mm bases in 10 ranks of 3, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 75×250 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
100×25 mm tray adapter for 4 miniatures on 20×20 mm bases in a single rank of 4, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 100×25 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
100×50 mm tray adapter for 8 miniatures on 20×20 mm bases in 2 ranks of 4, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 100×50 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
100×75 mm tray adapter for 12 miniatures on 20×20 mm bases in 3 ranks of 4, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 100×75 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
100×100 mm tray adapter for 16 miniatures on 20×20 mm bases in 4 ranks of 4, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 100×100 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
100×125 mm tray adapter for 20 miniatures on 20×20 mm bases in 5 ranks of 4, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 100×125 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
100×150 mm tray adapter for 24 miniatures on 20×20 mm bases in 6 ranks of 4, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 100×150 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
100×175 mm tray adapter for 28 miniatures on 20×20 mm bases in 7 ranks of 4, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 100×175 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
100×200 mm tray adapter for 32 miniatures on 20×20 mm bases in 8 ranks of 4, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 100×200 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
100×225 mm tray adapter for 36 miniatures on 20×20 mm bases in 9 ranks of 4, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 100×225 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
100×250 mm tray adapter for 40 miniatures on 20×20 mm bases in 10 ranks of 4, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 100×250 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
125×25 mm tray adapter for 5 miniatures on 20×20 mm bases in a single rank of 5, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 125×25 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
125×50 mm tray adapter for 10 miniatures on 20×20 mm bases in 2 ranks of 5, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 125×50 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
125×75 mm tray adapter for 15 miniatures on 20×20 mm bases in 3 ranks of 5, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 125×75 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
125×100 mm tray adapter for 20 miniatures on 20×20 mm bases in 4 ranks of 5, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 125×100 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
125×125 mm tray adapter for 25 miniatures on 20×20 mm bases in 5 ranks of 5, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 125×125 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
125×150 mm tray adapter for 30 miniatures on 20×20 mm bases in 6 ranks of 5, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 125×150 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
125×175 mm tray adapter for 35 miniatures on 20×20 mm bases in 7 ranks of 5, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 125×175 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
125×200 mm tray adapter for 40 miniatures on 20×20 mm bases in 8 ranks of 5, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 125×200 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
125×225 mm tray adapter for 45 miniatures on 20×20 mm bases in 9 ranks of 5, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 125×225 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
125×250 mm tray adapter for 50 miniatures on 20×20 mm bases in 10 ranks of 5, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 125×250 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
150×25 mm tray adapter for 6 miniatures on 20×20 mm bases in a single rank of 6, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 150×25 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
150×50 mm tray adapter for 12 miniatures on 20×20 mm bases in 2 ranks of 6, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 150×50 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
150×75 mm tray adapter for 18 miniatures on 20×20 mm bases in 3 ranks of 6, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 150×75 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
150×100 mm tray adapter for 24 miniatures on 20×20 mm bases in 4 ranks of 6, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 150×100 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
150×125 mm tray adapter for 30 miniatures on 20×20 mm bases in 5 ranks of 6, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 150×125 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
150×150 mm tray adapter for 36 miniatures on 20×20 mm bases in 6 ranks of 6, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 150×150 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
150×175 mm tray adapter for 42 miniatures on 20×20 mm bases in 7 ranks of 6, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 150×175 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
150×200 mm tray adapter for 48 miniatures on 20×20 mm bases in 8 ranks of 6, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 150×200 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
150×225 mm tray adapter for 54 miniatures on 20×20 mm bases in 9 ranks of 6, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 150×225 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
150×250 mm tray adapter for 60 miniatures on 20×20 mm bases in 10 ranks of 6, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 150×250 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
175×25 mm tray adapter for 7 miniatures on 20×20 mm bases in a single rank of 7, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 175×25 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
175×50 mm tray adapter for 14 miniatures on 20×20 mm bases in 2 ranks of 7, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 175×50 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
175×75 mm tray adapter for 21 miniatures on 20×20 mm bases in 3 ranks of 7, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 175×75 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
175×100 mm tray adapter for 28 miniatures on 20×20 mm bases in 4 ranks of 7, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 175×100 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
175×125 mm tray adapter for 35 miniatures on 20×20 mm bases in 5 ranks of 7, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 175×125 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
175×150 mm tray adapter for 42 miniatures on 20×20 mm bases in 6 ranks of 7, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 175×150 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
175×175 mm tray adapter for 49 miniatures on 20×20 mm bases in 7 ranks of 7, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 175×175 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
175×200 mm tray adapter for 56 miniatures on 20×20 mm bases in 8 ranks of 7, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 175×200 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
175×225 mm tray adapter for 63 miniatures on 20×20 mm bases in 9 ranks of 7, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 175×225 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
175×250 mm tray adapter for 70 miniatures on 20×20 mm bases in 10 ranks of 7, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 175×250 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
200×25 mm tray adapter for 8 miniatures on 20×20 mm bases in a single rank of 8, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 200×25 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
200×50 mm tray adapter for 16 miniatures on 20×20 mm bases in 2 ranks of 8, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 200×50 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
200×75 mm tray adapter for 24 miniatures on 20×20 mm bases in 3 ranks of 8, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 200×75 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
200×100 mm tray adapter for 32 miniatures on 20×20 mm bases in 4 ranks of 8, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 200×100 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
200×125 mm tray adapter for 40 miniatures on 20×20 mm bases in 5 ranks of 8, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 200×125 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
200×150 mm tray adapter for 48 miniatures on 20×20 mm bases in 6 ranks of 8, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 200×150 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
200×175 mm tray adapter for 56 miniatures on 20×20 mm bases in 7 ranks of 8, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 200×175 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
200×200 mm tray adapter for 64 miniatures on 20×20 mm bases in 8 ranks of 8, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 200×200 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
200×225 mm tray adapter for 72 miniatures on 20×20 mm bases in 9 ranks of 8, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 200×225 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
200×250 mm tray adapter for 80 miniatures on 20×20 mm bases in 10 ranks of 8, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 200×250 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
225×25 mm tray adapter for 9 miniatures on 20×20 mm bases in a single rank of 9, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 225×25 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
225×50 mm tray adapter for 18 miniatures on 20×20 mm bases in 2 ranks of 9, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 225×50 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
225×75 mm tray adapter for 27 miniatures on 20×20 mm bases in 3 ranks of 9, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 225×75 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
225×100 mm tray adapter for 36 miniatures on 20×20 mm bases in 4 ranks of 9, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 225×100 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
225×125 mm tray adapter for 45 miniatures on 20×20 mm bases in 5 ranks of 9, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 225×125 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
225×150 mm tray adapter for 54 miniatures on 20×20 mm bases in 6 ranks of 9, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 225×150 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
225×175 mm tray adapter for 63 miniatures on 20×20 mm bases in 7 ranks of 9, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 225×175 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
225×200 mm tray adapter for 72 miniatures on 20×20 mm bases in 8 ranks of 9, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 225×200 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
225×225 mm tray adapter for 81 miniatures on 20×20 mm bases in 9 ranks of 9, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 225×225 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
225×250 mm tray adapter for 90 miniatures on 20×20 mm bases in 10 ranks of 9, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 225×250 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
250×25 mm tray adapter for 10 miniatures on 20×20 mm bases in a single rank of 10, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 250×25 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
250×50 mm tray adapter for 20 miniatures on 20×20 mm bases in 2 ranks of 10, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 250×50 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
250×75 mm tray adapter for 30 miniatures on 20×20 mm bases in 3 ranks of 10, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 250×75 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
250×100 mm tray adapter for 40 miniatures on 20×20 mm bases in 4 ranks of 10, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 250×100 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
250×125 mm tray adapter for 50 miniatures on 20×20 mm bases in 5 ranks of 10, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 250×125 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
250×150 mm tray adapter for 60 miniatures on 20×20 mm bases in 6 ranks of 10, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 250×150 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
250×175 mm tray adapter for 70 miniatures on 20×20 mm bases in 7 ranks of 10, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 250×175 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
250×200 mm tray adapter for 80 miniatures on 20×20 mm bases in 8 ranks of 10, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 250×200 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
250×225 mm tray adapter for 90 miniatures on 20×20 mm bases in 9 ranks of 10, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 250×225 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
250×250 mm tray adapter for 100 miniatures on 20×20 mm bases in 10 ranks of 10, with 25×25 mm spaces for The Old World.
Laser-cut MDF grid, with engraved marks at the edge of each space. It sits on top of the 250×250 mm magnetic tray for 25×25 mm bases in the same formation, loose or glued with superglue.
View full details
